-
張靜
(重慶大學材料學院女教授)
鎖定
張靜,女,工學博士,重慶大學材料學院教授,博士生導師。2006年教育部“新世紀優秀人才支持計劃”入選者,2007年第十屆“中國青年科技獎”獲得者,2008年重慶市首屆傑出青年基金獲得者,2009年入選“新世紀百千萬人才工程”國家級人選。
[1]
- 職 業
- 教師
- 主要成就
- 主持和完成國家和省部級科研項目20餘項
- 性 別
- 女
- 個人榮譽
- 2010年重慶市自然科學二等獎
- 職 稱
- 教授
張靜人物履歷
2000-2001年獲荷蘭Nuffic 獎學金在荷蘭Delft University of Technology國家電鏡中心工作。
2002年受聘為重慶大學副教授。
2007年評為重慶大學教授。
張靜研究方向
高強韌鎂合金新材料設計和開發。
耐熱變形鎂合金設計和理論。
新型鎂基功能材料的製備和改性。
基於第一性原理的材料設計和計算。
張靜主要貢獻
主持和完成國家和省部級科研項目20餘項,8次獲國家和省部級科技獎勵,其中國家科技進步二等獎1項,科技部杜邦科技創新獎(國際合作獎)1項,省部級自然科學二等獎1項,省部級科技進步一等獎4項、二等獎1項;已在國內外發表論文80餘篇,合作出版專著1本,參編3本;以第一發明人申請國家發明專利9項,已授權5項;負責和參與制訂鎂合金材料、產品國家標準7項
[1]
,已頒佈實施3項。
承擔項目
1. 影響鎂合金屈強比的顯微組織參量表徵及其控制(2008BA4036),重慶市傑出青年科學基金項目,省部級,項目負責人。
2. 新型鎂合金材料標準樣品及分析方法的研究(CSTC,2009AB4007),重慶市科技計劃重大專項子課題,省部級,項目負責人。
3. 高鋅新型Mg-Al-Zn基鎂合金的研究(50301018),國家自然科學基金項目,國家級,項目負責人。
4. 新型鎂基材料的反應合成與改性研究(NCET-06-0769),教育部“新世紀優秀人才支持計劃”項目,省部級,項目負責人。
5. 鎂合金強韌化機理與組織性能調控研究(2007CB613704),科技部重大基礎研究計劃“973”項目子項,國家級,主研。
6. 高強度變形鎂合金研製及其應用研究(2001AA331050),國家高技術研究發展計劃“863”重點項目,國家級,合金相控制及成分優化子課題負責人。
7. 變形鎂合金中第二相控制,國家自然科學基金項目(50725413),國家級,主研。
張靜獲獎記錄
2010年重慶市自然科學二等獎(排名第1)。
2009年“新世紀百千萬人才工程” 國家級人選。
2007年第十屆“中國青年科技獎”獲得者。
2004年國家科技進步二等獎(排名第2)。
2008年首屆重慶市傑出青年科學基金獲得者。
2006年教育部“新世紀優秀人才支持計劃”入選者。
2006年教育部科技進步一等獎(校方排名第2)。
2001年科技部杜邦科技創新獎(排名第2)。
2000年中國高校科技進步一等獎(排名第2)。
張靜論文及專著
(1) Jing Zhang*, Guoqiang Xi, Xin Wan, Chao Fang, The dislocation-twin interaction and evolution of twin boundary in AZ31 Mg alloy, Acta Materialia 133(2017)208-216
(2) Guobao Liu, Jing Zhang*, Guoqiang Xi, Rulin Zuo, Shuang Liu, Designing Mg alloys with high ductility: reducing the strength discrepancies between soft deformation modes and hard deformation modes, Acta Materialia 141 (2017) 1-9
(3) Jing Zhang*, Yuchen Dou, Hongbiao Dong, Intrinsic ductility of Mg-based binary alloys: A first-principles study, Scripta Materialia89 (2014) 13–16
(4) Jing Zhang*, Yuchen Dou, Yi Zheng, Twin-boundary segregation energies and solute-diffusion activation enthalpies in Mg-based binary systems: A first-principles study, Scripta Materialia 80 (2014) 17–20
(5) Jing Zhang*, Xufeng Zhang, Weiguo Li, Fusheng Pan,Zhengxiao Guo, Partition of Er among the constituent phases and the yield phenomenon in a semi-continuously cast Mg–Zn–Zr alloy,Scripta Materialia63 (2010) 367-370
(6) Jing Zhang*, Min Liu, Yuchen Dou, Guobao Liu, Role of alloying elements in the mechanical behaviors of an Mg-Zn-Zr-Er alloy, Metallurgical and Materials Transaction A 12 (2014) 5499-5507
(7) Jing Zhang*, Hao Huang, Chengbo Yang, Effects of hot ring forging on microstructure, texture and mechanical properties of AZ31 magnesium alloy,Materials Science & Engineering A679 (2017) 20–27
(8) Hao Huang, Jing Zhang*, Microstructure and mechanical properties of AZ31 magnesium alloy processed by multi-directional forging at different temperatures,Materials Science & Engineering A674 (2016) 52-68
(9) Jing Zhang*, Boquan Chen, Chuanpu Liu, An investigation of dynamic recrystallization behavior of ZK60-Er magnesium alloy, Materials Science & Engineering A612 (2014) 253-266
(10) Boquan Chen, Jing Zhang*, Microstructure and mechanical properties of ZK60-Er magnesium alloys, Materials Science & Engineering A 633 (2015) 154-160
(11) Jing Zhang*, Fuqing Yuan, Min Liu, Fusheng Pan, Microstructure and mechanical properties of Mg–1.8%Mn alloy modified by single Er and composite Er/Al microalloying, Materials Science & Engineering A 576 (2013) 185–191
(12) Jing Zhang*, Weiguo Li, Baoxiang Zhang, Yuchen Dou, Influence of Er addition and extrusion temperature on the microstructure and mechanical properties of a Mg-Zn-Zr magnesium alloy,Materials Science & Engineering A528 (2011) 4740–4746
(13) Jing Zhang*, Zhengxiao Guo, Fusheng Pan, Zhongsheng Li, Xiaodong Luo, Effect of composition on the microstructure and mechanical properties of Mg-Zn-Al alloys,Materials Science & Engineering A456 (2007) 43-51
(14) Jing Zhang*, Fuqing Yuan, Yong Du, Enhanced age-strengthening by two-step progressive solution treatment in an Mg-Zn-Al-Re alloy, Materials & Design 52 (2013) 332–336
(15)Jing Zhang*, Boquan Chen, Baoxiang Zhang, Effect of initial microstructure on the hot compression deformation behavior of a 2219 aluminum alloy, Materials & Design34 (2012) 15-21
(16) Jing Zhang*, Chao Fang, Fuqing Yuan, Chuanpu Liu, A comparative analysis of constitutive behaviors of Mg–Mn alloys with different heat-treatment parameters,Materials & Design32 (2011) 1783–1789
(17) Jing Zhang*, Qi Ma, Fusheng Pan, Effects of trace Er addition on the microstructure and mechanical properties of Mg–Zn–Zr alloy,Materials & Design 31 (2010) 4043-4049
(18) Guoqiang Xi, Jing Zhang*, Chao Fang, Effects of alloying elements on the cohesion of{10-11} twin boundary from first-principles calculations,Materials Letters182 (2016) 198-200
(19) Jing Zhang*, Guobao Liu, Xin Wei, Strengthening and ductilization potentials of nonmetallic solutes in magnesium: First-principles calculation of generalized stacking fault energies,Materials Letters150 (2015) 111–113
(20) Jing Zhang*, Yuchen Dou, Baoxiang Zhang, Xiaodong Luo, Elevated-temperature plasticity and mechanical properties of a rare earth-modified Mg-Zn-Al alloy, Materials Letters65 (2011) 944-947
(21) Guobao Liu, Jing Zhang*,Yuchen Dou, First-principles study of solute-solute binding in magnesium alloys,Computational Materials Science 103 (2015) 97–104
(22) Yuchen Dou, Jing Zhang*, Effects of structural relaxation on the generalized stacking fault energies of hexagonal-close-packed system from first-principles calculations, Computational Materials Science98 (2015) 405–409
(23) Jing Zhang*, Yuchen Dou, Guobao Liu, Zhengxiao Guo, First-principles study of stacking fault energies in Mg-based binary alloys, Computational Materials Science79 (2013) 564-569
(24) Jing Zhang*, Rulin Zuo, Youxing Chen, Fusheng Pan, Xiaodong Luo, Microstructure evolution during homogenization of a τ-type Mg-Zn-Al alloy, Journal of Alloys and Compounds. 448 (2008) 316-320
(25) Jing Zhang*, Wei Yan, Chenguang Bai, Fusheng Pan, Mechanochemical synthesis of a Mg-Li-Al-H complex hydride, Journal of Materials Research24 (2009) 2880-2885
(26) Jing Zhang*, Fusheng Pan, Rulin Zuo, Chenguang Bai, The low temperature precipitation in commercial-purity aluminium sheets for foils,Journal of Materials Processing Technology206 (2008) 382-387
(27) Guoqiang Xi, Jing Zhang*, Xin Wan,{10-11}twin boundary showing very large deviation from the theoretical one in deformed magnesium alloy, Materials Characterization 132 (2017) 280-283
(28)Jing Zhang*, Hao Huang, Microstructure and mechanical properties of AZ31 alloy ring processed by hot forging, Materials Science and Technology 32 (2016) 1-10
潘復生,張靜,鋁箔材料,化學工業出版社,2005.8