張峯

2013.9-2018.3 西安交通大學 能源與動力工程學院 動力工程及工程熱物理 工學博士

2009.9-2013.6 西安交通大學 能源與動力工程學院 能源動力系統及自動化/金融學 工學/經濟學學士 ^[1] 

2018.4-至今 湖南大學機械與運載工程學院 助理教授 ^[1] 

研究方向一：工程熱科學(包括：①熱工設備（燃氣輪機、內燃機等）氣動傳熱仿真與優化；②高效傳熱與節能儲能技術；③新能源動力電池系統熱流協同優化；④電廠熱經濟性分析）；

研究方向二：動力機械新技術(包括：①動力機械排放污染及控制；②新能源動力機械及工程；③動力機械低污染燃燒；④動力機械結構強度與流固耦合仿真優化)；

研究方向三：動力工程(包括：①微能源機電系統流動、傳熱與燃燒；②新能源利用工程及關鍵技術；③能源動力系統工程、能源安全及能源經濟)。

以上3個研究方向招收機械工程學術型碩士生、動力工程專業型碩士生、車輛工程專業型碩士生、機械工程專業型碩士生。 ^[1] 

燃氣輪機透平翅片型徑向輪緣密封封嚴機理及結構優化，湖南大學“青年教師成長計劃”項目，主持

燃氣輪機透平流動及傳熱三維CFD驗證，校企合作項目，參與

一次和二次再熱機組的循環熱經濟性與參數匹配，校企合作項目，參與

換熱器設計、優化及試驗枱方案設計，校企合作項目，參與 ^[1] 

[1]Zhang Feng, Wang Xinjun, Li Jun, et al. Numerical investigation on the effect of radial location of sealing air inlet and its geometry on the sealing performance of a stator-well cavity[J]. International Journal of Heat and Mass Transfer, 2017, 115PB: 820-832.

[2]Zhang Feng, Wang Xinjun, Li Jun, et al. Computations on the flow characteristics and sealing performance of a stator well cavity for the second stage in gas turbine[J]. Applied Thermal Engineering, 2017, 125: 1300-1319.

[3]Zhang Feng, Wang Xinjun, Li Jun. Numerical investigation of flow and heat transfer characteristics in radial pre-swirl system with different pre-swirl nozzle angles[J]. International Journal of Heat and Mass Transfer, 2016, 95: 984-995.

[4]Zhang Feng, Wang Xinjun, Li Jun. Numerical investigation on the flow and heat transfer characteristics in radial pre-swirl system with different fillet radius at the junction of inlet cavity and nozzle[J]. Applied Thermal Engineering, 2016, 106: 1165-1175.

[5]Zhang Feng, Wang Xinjun, Li Jun. Numerical investigation of the flow and heat transfer characteristics for a pre-swirl rotor-stator system with center inflow[J]. Applied Thermal Engineering, 2016, 105: 646-658.

[6]Zhang Feng, Wang Xinjun, Li Jun. Effects of coolants on the flow and heat transfer characteristics in a non-rotating and rotating two-pass rectangular channel[J]. International Journal of Heat and Mass Transfer, 2015, 91: 390-400.

[7]Zhang Feng, Wang Xinjun, Li Jun. The effects of upstream steps with unevenly spanwise distributed height on rectangular hole film cooling performance[J]. International Journal of Heat and Mass Transfer, 2016, 102: 1209-1221.

[8]Zhang Feng, Wang Xinjun, Li Jun. Flow and heat transfer characteristics in rectangular channels using combination of convex-dimples with grooves[J]. Applied Thermal Engineering, 2017, 113: 926-936.

[9]Zhang Feng, Wang Xinjun, Liao Gaoliang, Li Jun. Computational fluid dynamics analysisi for effect of length to diameter ratio of nozzles on performance of pre-swirl systems[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2015, 229(4): 381-392.

[10]Wang Xinjun, Zhang Feng, Zheng Daren, Li Jun. Effect of droplet characteristics and rotation speed on the Flow and Heat Transfer Characteristics of Mist/air Cooling in a Rotating Ribbed Two-pass Rectangular Channel[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2017, 231(2): 119-132.

[11]Zhang Feng, Wang Xinjun, Li Jun, et al. Numerical investigation of impingement heat transfer on concave- and convex-dimpled plate with different dimple arrangements[C]. ASME Turbo Expo 2016, ASME Paper GT2016-56751.

[12]Zhang Feng, Wang Xinjun, Li Jun, et al. Numerical study on the flow and heat transfer characteristics in rectangular channels with grooves and different protrusions[C]. ASME Turbo Expo 2017, ASME Paper GT2017-63737.

[13]張峯，王新軍，李軍．帶肋U型通道中的汽霧/空氣流動與換熱數值研究[J]．西安交通大學學報，2015，49(9)：52-57．

[14]張峯，王新軍，李軍．球凹平板衝擊冷卻性能的數值研究及結構改進[J]．西安交通大學學報，2016，50(01)：124-130．

[15]張峯，王新軍，李軍．冷卻孔佈置對透平轉靜腔室性能影響的數值研究[J]．西安交通大學學報，2016，50(03)：55-61．

[16]張峯，王新軍，李軍，豐鎮平．肋片-凹槽通道內的流動與換熱特性數值研究[J]．工程熱物理學報，2017，38(7)：1512-1518．

[17]Zheng Daren, Wang Xinjun, Zhang Feng, et al. Numerical investigation on the effects of the divided steps on film cooling performance[J]. Applied Thermal Engineering, 2017,124: 652-662.

[18]Wang Xinjun, Liao Gaoliang, Zhang Feng, et al. Numerical investigation on the steady and unsteady flow characteristics of rim seal for the first stage in gas turbine[J]. Applied Thermal Engineering, 2016, 99: 11-22.

[19]Liao Gaoliang, Wang Xinjun, Li Jun, Zhang Feng. A Numerical comparison of thermal performance of in-line pin-fins in a wedge duct with three kinds of coolant[J]. International Journal of Heat and Mass Transfer, 2014, 77: 1033-1042.

[20]Zheng Daren, Wang Xinjun, Zhang Feng, et al. The effect of upstream ramps with different shapes on film cooling efficiency[C]. ASME Turbo Expo 2017, ASME Paper GT2017-63741.

[21]Zhou Junfei, Wang Xinjun, Li Jun, Zhang Feng, et al. Numerical investigation on the cooling effectiveness among air and steam and mist/steam for a gas turbine vane[C]. ASME Turbo Expo 2017, ASME Paper GT2017-63739.

[22]Liao Gaoliang, Wang Xinjun, Li Jun, Zhang Feng. Effects of Curvature on the Film Cooling Effectiveness of Double-Jet Film Cooling [C]. ASME Turbo Expo 2014, ASME Paper GT2014-26263.

[23]鄭達仁，王新軍，張峯，袁奇．上游橫向間斷肋佈置方式對氣膜冷卻性能的影響[J]，西安交通大學學報，2017，51(11)：8-14．

[24]周駿飛，王新軍，張峯．連續收縮擴張氣膜孔排冷卻特性的數值模擬[J]，西安交通大學學報，2016，50(03)：38-44．

[25]程鵬，王新軍，張峯等．核電汽輪機彎管式汽水分離器的改進結構及其除濕性能[J]．西安交通大學學報，2014，48(5)：61-66.

[26]謝金偉，王新軍，廖高良，張峯等．汽輪機調節閥-調節級段三維流動與壓力損失數值研究[J]．中國電機工程學報，2014，34(20)：3376-3383． ^[1] 

[1]第十屆“吳仲華優秀研究生獎”，中國工程熱物理學會和中國科學院工程熱物理研究所，2017.

[2]2017年博士研究生國家獎學金，中華人民共和國教育部，2017.

[3]2016年博士研究生國家獎學金，中華人民共和國教育部，2016. ^[1]