-
黃思
(華南理工大學教授)
鎖定
黃 思,男,1962年5月出生,廣西南寧人,漢族,博士,教授,博士生導師。1985年以來,任中國石油大學(北京)機電工程學院助教、講師、副教授;日本國立資源環境研究所海洋工程研究室客座研究員;加拿大Toyo泥漿泵公司工程師;Sulzer(蘇爾壽)泵公司加拿大分公司工程師等職。現任華南理工大學機械與汽車工程學院教授、博士生導師。 長期從事流體機械、化工過程機械及油氣儲運設備的工作理論和應用、單體和系統多物理場耦合分析、故障診斷和測試等方面的科研教學工作,先後參加、完成了“油田注水輸油泵節能改造”、“三元葉輪離心泵在石油工業的推廣應用”、“葉片式氣液混輸泵的研究開發”、“水力油水旋流分離器的研究開發”等部級科研攻關項目,為此榮獲1992年國家教委科技進步一等獎、1995年石油部科技進步二等獎、2000年教育部科技進步三等獎。共先後在國際期刊、國際會議、中文核心期刊上發表論文150餘篇,其中多篇被SCI、EI收錄,出版專著1部並擁有多項發明專利和實用新型專利。現兼任中國化工學會化工機械專業委員會委員;廣東省流體機械技術學會理事會副理事長、專家庫專家;廣東省企業科技特派員;Renewable Energy; Journal of Fluids Engineering, ASME; Journal of Applied Fluid Mechanics等期刊審稿人。
[1]
- 中文名
- 黃思
- 國 籍
- 中國
- 民 族
- 漢
- 籍 貫
- 廣西南寧
- 出生日期
- 1962年5月
- 畢業院校
- 日本東北大學研究生院
- 職 業
- 教師
- 職 稱
- 教授
黃思人物經歷
1982年畢業於中山大學數力系,獲學士學位;1985年畢業於中國石油大學(北京)研究生院機械系,獲碩士學位;1995年畢業於日本東北大學研究生院機械系,獲博士學位。1985年以來,任中國石油大學(北京)機電工程學院助教、講師、副教授;日本國立資源環境研究所海洋工程研究室客座研究員;加拿大Toyo泥漿泵公司工程師;Sulzer(蘇爾壽)泵公司加拿大分公司工程師等職。現任華南理工大學機械與汽車工程學院教授、博士生導師。
黃思研究方向
黃思主要貢獻
共先後在國際期刊、國際會議、中文核心期刊上發表論文150餘篇,其中多篇被SCI、EI收錄,出版專著1部並擁有多項發明專利和實用新型專利。現兼任中國化工學會化工機械專業委員會委員;廣東省流體機械技術學會理事會副理事長、專家庫專家;廣東省企業科技特派員;Renewable Energy; Journal of Fluids Engineering, ASME; Journal of Applied Fluid Mechanics等期刊審稿人。
[1]
黃思代表性論著
- 黃 思:流體機械數值仿真研究及應用,廣州,華南理工大學出版社,2015.10。
- Huang S, Wei Y, Guo C, et al. Numerical simulation and performance prediction of centrifugal pump’s full flow field based on OpenFOAM [J]. Processes, 2019, 7(9): 605.
- Huang S, Huang J, Guo J, et al. Study on wear properties of the flow parts in a centrifugal pump based on EDEM–Fluent coupling [J]. Processes, 2019, 7(7): 431.
- Huang S, Wang X, Mo Y, et al. Study on liquid ring compressor theoretical model and suction compression performance based on the actual working cycle [J]. Journal of Chemical Engineering of Japan, 2019, 52(5): 384-391.
- Huang S, Qiu G, Su X, et al. Performance prediction of a centrifugal pump as turbine using rotor-volute matching principle [J]. Renewable Energy, 2017, 108: 64-71.
- Huang S, He J, Wang X, et al. Theoretical model for the performance of liquid ring pump based on the actual operating cycle [J]. International Journal of Rotating Machinery, 2017, 2017(2):1-9.
- Huang S, Su X and Qiu G. Transient numerical simulation for solid-liquid flow in a centrifugal pump by DEM-CFD coupling [J]. Engineering Applications of Computational Fluid Mechanics, 2015, 9(1): 411-418.
- Huang S, Su X, Yang F, et al. Numerical simulation of 3D unsteady flow in roto-jet pump by dynamic mesh technique [J]. Progress in Computational Fluid Dynamics, 2015, 15(4): 265-267.
- Huang S, Su X, Guo J, et al. Unsteady numerical simulation for gas–liquid two-phase flow in self-priming process of centrifugal pump [J]. Energy Conversion and Management, 2014, 85: 694-700.
- Huang S, Mohamad A A, Nandakumar K, et al. Numerical simulation of unsteady flow in a multistage centrifugal pump using sliding mesh technique [J]. Progress in Computational Fluid Dynamics, 2010, 10(4):239-245.
- Huang S, Mohamad A A. Modeling of cavitation bubble dynamics in multicomponent mixtures [J]. Journal of Fluids Engineering, 2009, (3):031301-031305.
- Huang S, Mohamad A, Nandakumar K.Numerical analysis of a two-phase flow and mixing process in a stirred tank [J]. International Journal of Chemical Reactor Engineering, 2008, 6(1):77-90.
- Huang S, Islam M F, Liu P. Numerical simulation of 3D turbulent flow through an entire stage in a multistage centrifugal pump [J]. International Journal of Computational Fluid Dynamics, 2006, 20(5): 309-314.
- Huang S. Numerical simulation of oil-water hydrocyclone using Reynolds-stress model for Eulerian multiphase flows [J]. Canadian Journal of Chemical Engineering, 2005, 83(5): 829-834.
- Huang S, Ihara A, Watanabe H, et al. Effects of solid particle properties on cavitation erosion in solid-water mixtures [J]. Journal of Fluids Engineering, 1996, 118(4):749-755.
1. 黃思,王學謙,何婧等:液體泵實際工作循環模型的建立方法(發明專利,CN201710307846.3,授權日:2020-07-28);
2. 黃思,何婧,王學謙等:液環泵非穩態氣體流場及吸入壓縮性能的簡化計算方法(發明專利,CN201710152116.0,授權日:2020-05-22);
3. 黃思,楊富翔:基於三維動網格的旋噴泵非定常流場的計算方法(類型:發明專利,ZL201310138337.4,授權日:2016-8-3);
4. 黃思,陳志勝:基於三維動網格的旋轉葉輪機械非定常流場的計算方法(類型:發明專利,ZL201310139562.X,授權日:2016-8-3);
5. 黃思 等:高效節能型立式畢託泵(類型:實用新型,專利號:CN201827086U,授權時間:2011-05-11)。
黃思獲獎記錄
黃博士長期從事流體機械及工程的科研教學工作,先後參加、完成了“油田注水輸油泵節能改造”、“三元葉輪離心泵在石油工業的推廣應用”、“葉片式氣液混輸泵的研究開發”、“水力油水旋流分離器的研究開發”等部級科研攻關項目,為此榮獲1992年國家教委科技進步一等獎、1995年石油部科技進步二等獎、2000年教育部科技進步三等獎。
- 參考資料
-
- 1. 華南理工大學教師信息 .華南理工大學教師信息.2022-02-24[引用日期2022-09-11]