邵天敏

招生專業：機械設計及理論研究領域：摩擦學、表面工程 ^[1] 

2005.12— 清華大學摩擦學國家重點實驗室 研究員 博導(2006)

2004.01—2004.03 香港城市大學 Research Fellow

2002.03—2002.09 香港城市大學Research Associate

1995.08—2005.12 清華大學精儀系摩擦學國家重點實驗室 副教授

1994.10—1995.08 清華大學精儀系摩擦學國家重點實驗室 講師

1992.12—1994.10 清華大學精儀系摩擦學國家重點實驗室 博士後

1989.10—1992.07 羅馬尼亞石油與天然氣學院機械系 博士

1983.09—1986.07 大慶石油學院機械系 碩士

1978.10—1982.07 大慶石油學院機械系 學士 ^[1] 

中國機械工程學會摩擦學分會副秘書長；

中國電工學會離子束與電子束專業委員會 副主任委員；

中科院蘭州化學物理研究所固體潤滑國家重點實驗室學術委員會委員；

西安交通大學軸承轉子與動力學系統教育部重點實驗室學術委員會委員；

國際摩擦學會（ITC）聯絡委員；

STLE中國顧問委員會 主席；

《中國表面工程》、《潤滑與密封》、《Friction》 編委。 ^[1] 

表面塗層/薄膜製備及性能

材料摩擦磨損

表面織構及其摩擦學效應

材料接觸和摩擦過程中的電荷轉移行為 ^[1] 

1.Hongfei Shang, Jian Li and Tianmin Shao，Mechanical properties and thermal stability of TiAlN/Ta multilayer film deposited by ion beam assisted deposition，Applied Surface Science, 2014, 310: 317–320.

2.Yuanyue Zhang and Tianmin Shao, Contact electrification between polymers and steel, Journal of Electrostatics, 2013, 71:862-866.

3.Yuanyue Zhang and Tianmin Shao, Effect of contact deformation on contact electrification: A first principles calculation, Journal of Physics D-Applied Physics, 2013, 46(23): 235304.

4. Yuanyue Zhang and Tianmin Shao, A method of charge measurement for contact electrification, Journal of Electrostatics, 2013,71(4):712-716.

5. Zhang Yuan-Yue, Shao Tian-Min and Su Kang, First-principles study of electronic properties of interfacial atoms in metal–metal contact electrification，Chin. Phys. B. 2013, 22(5):053403.

6. Jun Xu, Tianmin Shao，Thickness dependence of the structural, mechanical and electrical properties of Ni films deposited on polyimide by ion beam assisted deposition (IBAD)，Surface and Interface Analysis，2013, 45(3): 691–697.

7. X. Huang, H. Kasem, HF. Shang, TM. Shao, and I. Etsion: Experimental study of a potential weakening effect in spheres with thin hard coatings, Wear, 2012,296(1-2):590-597.

8. Songbo Wei, Tianmin Shao, Jun Xu, Investigation of carbon nitride films deposited by ion beam-assisted deposition with low bombarding energy of N ions, Materials Chemistry and Physics, 2012,135(2-3): 733-737.

9. Songbo Wei, Tianmin Shao, Jun Xu, Effect of bombarding energy of N ions on composition, hardness and surface free energy of carbon nitride films, Surface & Coatings Technology, 2012,206 (19-20):3944-3948.

10. Jiachen Liu, Dameng Liu, Tianmin Shao，FDTD simulation on laser-induced enhancement of electric field in the near-field apertureless probe system, Laser Physics Letter, 2012,9(7):511-518.

11. Songbo Wei, Tianmin Shao, Peng Ding, Improvement of orthodontic friction by coating archwire with carbon nitride film，Applied Surface Science, 2011,257(24): 10333-10337.

12. Songbo Wei, Tianmin Shao, Peng Ding, Study of CNx films coated 316L stainless steel for dental applications, Diamond and Related Materials, 2010,19(5-6): 648–653.

13. Jun Xu, Tianmin Shao, Songbo Wei, Li Qin Effects of ion beam bombardment on the properties of polyimide and Ni films deposited on polyimide by ion beam assisted deposition, Surface and Coatings Technology, 2010,204(21-22):3443-3450.

14. Yiqian Zhou, Tianmin Shao, and Liang Yin，A method of micro laser surface texturing based on optical fiber focusing,Laser Physics, 2009, 19(5):1061–1066.

15. 龔海飛，邵天敏，張晨輝，徐軍，TiN/Ti納米多層膜調製比對摩擦磨損行為影響的研究，無機材料學報, 2008,23(4):758-762.

16. 卿濤，邵天敏，温詩鑄，材料表面之間粘附過程分析,物理學報, 2007, 56（3）:1555-1562.

17. 卿濤，邵天敏，温詩鑄，相對濕度對材料表面粘附力影響的研究, 摩擦學學報, 2006,26(4):295-299.

18. Shao T.M., Luo J.G. Response frequency spectrum analysis for impact behavior assessment of material surfaces，Surf. and Coats Tech., 2005,192(2-3):365-373.

19. Tianmin Shao,Meng Hua, An approach for laser polishing of metals, Surface & Coatings Technology, 2005,197(1):77-84.

20. Sedao, T.M.Shao, H.Q.Mu, W.D. Yuan, Production of Al-Cu-Fe quasicrystalline film by pulsed laser induced vacuum arc deposition, Thin Solid Films, 2005,483:1-5.

21. ShaoT.M .Cao X.K. et al, Tribological Behaviour of Plasma Spray AlCuFe+Sn Composite Coatings, Journal of non-crystalline solids, 2004, 334-335C:466-470.

22. Yuan WD, Shao TM, Fleury E, Microstructure and tribological properties of plasma sprayed Al-Cu-Fe QC coatings, Surf. and Coats Tech., 2004,185(1): 99-105.

23. ShaoT.M. Meng H.Tam H.Y. Impact wear behavior of laser hardened hypoeutectoid 2Cr13 martensite stainless steel, Wear, 2003,255(1-6):444 – 455. ^[1]