-
許芬
(北方工業大學副教授)
鎖定
- 中文名
- 許芬
- 國 籍
- 中國
- 出生日期
- 1970年
- 性 別
- 女
許芬人物經歷
博士畢業後先後在新加坡和瑞士工作數年,從事數字信號處理、圖像處理和光電精密測量儀器的研究開發工作,作為主要研發人員,參加了“CCD數字水準測量儀的開發”、“基於半導體激光元件的面向一般非光學性反射目標的遠距離測量系統的設計和開發”、和“高精度水平傾角傳感器”等項目。2003年加入北方工業大學。
承擔北京市教委科技發展計劃面上項目一項、北京市現場總線技術及自動化重點實驗室智能移動機器人平台建設項目一項和重點實驗室開放課題一個。
許芬研究方向
機器視覺,激光測量技術,數字信號處理,及製造信息自動化技術。
許芬主要貢獻
1. Fen Xu, Wenfeng Liang, Optimal estimation of the central normal of a heliostat using UKF, the 11th Intl. Conf. on automation, robotics, control and vision (ICARCV2010), Dec.7-10, Singapore, 2010;(EI)
[1]
。
2. Fen Xu, Ming Gao, Human detection and tracking based on HOG and particle filter, the 3rd Intl. Congress on Image and Signal Processing, Oct. 16-18, Yantai, China, 2010; (EI)。
3. 許芬,塔式太陽能定日鏡聚光成像建模及仿真,太陽能學報,ISSN0254-0096,2010,21(10);(EI,中文核心,一級學會學報)。
4. Xu Fen, Li Jie, Human detection based on a DSP platform, IEEE International conference on electrical information & control engineering 2010, Wuhan, June 25-27, p335-339 ;(EI)。
5. Xu Fen, Gao Ming, Pedestrian tracking using particle filter algorithm, IEEE International conference on electrical information & control engineering 2010, Wuhan, June 25-27, p1478-1482 ;(EI)。
6. 高明,許芬,基於HOG的行人目標檢測,儀器儀表學報,ISSN 0254-3087,2009年, Vol.30, No.6,增刊I, p829-832。
7. 許芬,鹹寶金,李正熙,基於產生式規則的多傳感器融合方法及移動機器人避障,電子測量與儀器學報,2009.10;(中文核心,一級學會學報)。
8. F. Xu, Y.S. Wong and H.T. Loh, "Towards generic models for comparative evaluation and process selection in rapid prototyping & manufacturing technology", Journal of Manufacturing Systems, Vol. 19, No. 5, 2000, pp. 283-296。
9. F. Xu, Y.S. Wong and H.T. Loh, "A knowledge-based decision-support system for RP&M process selection", Proceeding of the 10th Solid Freeform Fabrication Symposium, University of Texas at Austin, TA, United States, Aug. 9-11, 1999. 5。
10. F. Xu, H.T. Loh and Y.S. Wong, "Considerations and selection of optimal orientation for different RP&M processes", Rapid Prototyping Journal, vol.5, No.2, 1999, pp54-60。
11. F. Xu, Y.S. Wong and H.T. Loh, "A proposed framework for rapid prototyping & manufacturing system selector", Proceedings of 8th International Manufacturing Conference with China (IMCC'98), Singapore, May 12-12, 1998, pp82-88。
12. F. Xu, Y.S. Wong, H.T. Loh, J.Y.H. Fuh and T. Miyazawa, "Optimal orientation with variable slicing in stereolithography". Rapid Prototyping Journal, vol.3, No. 3, 1997, pp76-88。
- 參考資料
-
- 1. 導師信息(許芬) .北方工業大學研究生部.2011[引用日期2012-11-19]