-
康健
(東北大學副教授)
鎖定
康健,男,博士,東北大學軋製技術及連軋自動化國家重點實驗室副教授。
[1]
- 中文名
- 康健
- 畢業院校
- 東北大學
- 學位/學歷
- 博士
- 職 業
- 教師
- 專業方向
- 材料加工工程
- 任職院校
- 東北大學
康健人物經歷
康健學習經歷
1. 2001.09 ~ 2005.08 大連交通大學材料科學與工程專業學士
2. 2005.09 ~ 2008.02 大連交通大學材料學專業碩士
3. 2008.03 ~ 2012.10 東北大學材料加工工程專業博士
[1]
康健工作經歷
1. 2012.12 ~ 2017.2 東北大學冶金工程師資博士後
康健研究領域
1. 熱連軋帶鋼新一代TMCP技術組織調控理論與工業應用
2. 熱軋無縫鋼管先進在線熱處理工藝技術開發與工業應用
3. 高強度低屈強比結構用鋼的組織調控與工藝開發
康健學術成果
康健科研項目
1. 國家自然科學基金鋼鐵聯合基金重點項目:熱軋無縫鋼管在線控制冷卻機制及形變/相變一體化在線組織調控(子課題)
2. 國家自然科學基金青年基金項目:基於動態碳配分行為的高強塑積熱軋復相組織調控機理
3. 寶鋼140熱軋無縫鋼管機組軋後冷卻中試實驗及控冷技術應用可行性研究
[1]
康健發表論文
以第一作者/通訊作者發表論文二十餘篇,部分代表論文如下:
[1]Design of a low densityFe-Mn-Al-C steel with high strength-high ductility combination involving TRIP effect and dynamic carbonpartitioning. Materials Science and Engineering A, 2019, 742: 464-477.
[2]Improvement of strength and toughness for hot rolled low-carbon bainitic steel via grain refinement and crystallographic texture. Materials Letters, 2016, 175: 157-160.
[3]Effect of Processing Variables on Microstructure and Yield Ratio of High Strength Constructional Steels. Journal of Iron and Steel Research, International, 2016, 23(8): 815-821.
[4]Microstructural characteristics and impact fracture behavior of a high-strength low-alloy steel treated by intercritical heat treatment. Materials Science and Engineering A, 2012, 553: 96-104.
[5]Combinedthermo-mechanical controlled processing and dynamic carbon partitioning of low carbon Si/Al-Mn steels, MaterialsScience and Engineering A, 2018, 732: 298-310.
[6]Quenching above martensitestart temperature in quenching and partitioning (Q&P) steel through control of partial phase transformation,Materials Letters, 2019, 230: 36-39.