周平

2003.8-2001.2 大連理工大學工程力學博士

1999.8-2003.7 大連理工大學工程力學學士

1996.9-1999.7 浙江省餘姚市餘姚中學 ^[1] 

2013.1至今 機械工程學院副教授

2010.1-2012.12 機械工程學院講師 ^[1] 

Yan, Ying,Wang, Yonghao,Zhou, Ping,Huang, Ning,Guo, Dongming.Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,56:506-512

Wang, Lin,Zhou, Ping,Yan, Ying,Zhang, Bi,Kang, Renke,Guo, Dongming.Chemical-mechanical wear of monocrystalline silicon by a single pad asperity[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2017,120:61-71

Zhou, Ping,Yan, Ying,Huang, Ning,Wang, Ziguang,Kang, Renke,Guo, Dongming.Residual Stress Distribution in Silicon Wafers Machined by Rotational Grinding[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2017,139(8)

Hu, Rui,Chen, Wenjiong,Li, Quhao,Liu, Shutian,Zhou, Ping,Dong, Zhigang,Kang, Renke.Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture Space Telescope[J],JOURNAL OF AEROSPACE ENGINEERING,2017,30(3)

周平,閆英,康仁科,郭東明.Nonlinear Compression Behavior of the Grooved Polishing Pad: AModel and Its Validation[J],ECS Journal of Solid State Science and Technology,2017

Shan, Kun,Zhou, Ping,Zuo, Yunsheng,Kang, Renke,Guo, Dongming.Analysis of the polishing ability of electrogenerated chemical polishing[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2017,47:122-130 ^[2] 

一種高平面度金屬超薄板的加工方法

一種新型CMP拋光墊修整器

電致化學拋光方法

一種非圓脹圈型密封環加工方法

一種平面電化學加工裝置

一種密封環加工預變形力加載夾具及其加載方式 ^[2] 

個性化硬脆材料零件高效精密磨削的基礎問題研究, 國家自然科學基金項目, 2018/08/16, 進行

化學機械拋光過程跨尺度多場耦合問題的建模與協同求解方法研究, 國家自然科學基金項目, 2014/09/01, 完成

低應力高效平坦化中的跨尺度接觸與流動行為研究, 國家自然科學基金項目, 2011/09/25-2014/12/31, 完成

距離敏感的電調控化學刻蝕納米加工新方法的研究, 國家自然科學基金項目, 2015/12/22, 完成

電致化學拋光方法基本原理與原型系統研製, 2015/09/29, 進行

燃料電池關鍵組件變形特性分析, 自選課題, 2019/02/20-2019/08/20, 進行 ^[2]