複製鏈接
請複製以下鏈接發送給好友
https://baike.baidu.hk/item/solidification/63321381
複製
複製成功

solidification

鎖定
solidification，英語單詞，主要用作名詞，主要意思為“凝固；團結；濃縮”等。 [1] 
外文名
solidification
詞    性
名詞
英式音標
[səˌlɪdɪfɪˈkeɪʃ(ə)n]
美式音標
[səˌlɪdɪfɪˈkeɪʃ(ə)n]

目錄

  1. 1 單詞釋義
  2. 2 短語搭配
  3. 3 雙語例句

solidification單詞釋義

英 [səˌlɪdɪfɪˈkeɪʃ(ə)n] 美 [səˌlɪdɪfɪˈkeɪʃ(ə)n]
n. 凝固；團結；濃縮 [1] 

solidification短語搭配

solidification point [物] 凝固點 ; 結晶温度 ; 凝點 ; 固化點
heat of solidification [熱] 凝固熱 ; [熱] 固化熱 ; 凝集熱
directional solidification [冶] 定向凝固 ; 方向性凝固 ; 定向性凝固 ; 採用方向性固化
unidirectional solidification 單向凝固 ; 定向凝固 ; 單向固化
solidification shrinkage [冶] 凝固收縮 ; 凝固收縮率 ; 會產生凝固收縮
solidification heat 凝固熱 ; 固化熱
solidification contraction 凝固收縮 ; 固化收縮作用
solidification process 固結過程 ; 凝固過程 ; 固化處理
solidification cracking 硬化裂紋 ; 凝固裂紋 [1] 

solidification雙語例句

  • The solidification and larkishness of those moments exposed my conflict and anxiety. 那些團結與嬉戲的瞬間將我的矛盾與不安暴露無遺。
  • Let her smile at the moment between the solidification? 讓她的笑容在剎那之間凝固？
  • Pressed Solidification Process Equation of Compatibility. 加壓凝固過程的諧調方程。
  • Low social mobility will ultimately result in class solidification. 低社會流動性最終會導致階層固化。
  • Water cooling circuits provide rapid, and directional solidification. 水冷循環提供迅速定向凝固。
  • The crystallization condition can affect solidification ways of the alloy. 熔體的結晶條件會影響合金的凝固方式。
  • They also undergo a high shrinkage or reduction in volume during solidification. 它們在固化過程中收縮較大或體積減少較多。
  • The systematical experiment on oil sludge solidification was carried out in laboratory. 在室內進行了油田污泥固化試驗研究。
  • This will provide experimental gist for solidification and stabilization of heavy metals. 這為重金屬的固化穩定化處理提供了實驗依據。
  • Igneous rock is rock formed by solidification from a molten state; especially from molten magma. 火成岩是從熔融狀態(特別是通過熔化岩漿)凝固而成的石頭。
  • Inclusion. Foreign material or non-metallic particles entrapped within the metal during solidification. 夾雜物。金屬凝固過程中殘留在其內部的雜質或非金屬顆粒。
  • Holding time is determined by the solidification time of the gate. We decide it according to the weight. 保壓時間的確定以澆口冷凝為依據。通過產品稱重來確定。
  • High water cement ratio during construction and low water cement ratio during solidification are realized. 實現了混凝土大水灰比施工、小水灰比固化。
  • In this paper, the microstructure of Spent ion Exchange Resin ASC cement-solidification matrix was studied. 研究了特種水泥(asc)樹脂固化體的微觀結構。
  • The research results may also help to improve the fabrication processes of directional turbine blade solidification. 研究結果對於定向凝固渦輪葉片設計、分析方法的完善和成形工藝的改進具有重要意義。
  • The two rapid-solidification techniques employed are melt-spinning technique (MS) and Hammer-and-Anvil technique (HA). 選擇的快速凝固方法為熔體旋轉法（MS）和錘砧法（HA）。
  • This is an algorithm solidification simulation about"multiple nodal region"in boundary node of casting and mold system. 本文研究了鑄件鑄型體系中異類材料分界面上“複合節點領域”的凝固計算。
  • Such phenomena were explained by analyzing the rapid solidification of monotectic alloys under the rapid solidification. 此外，還分析了快速凝固下偏晶合金的凝固過程，對上述現象進行了解釋。
  • The effect of pulsed current and pulsed magnetic field on the solidification structures of LY12 aluminum alloy was studied. 在LY12鋁合金凝固的過程中施加脈衝電流或脈衝磁場，研究脈衝電流或脈衝磁場對這種合金凝固組織的影響。
  • The interaction between casting and mold has a significant effect on the distribution of thermal stress during solidification. 鑄件-鑄型之間的相互作用對鑄件凝固過程中熱應力的分佈有很大的影響。
  • The fluid material takes the shape of the die cavity and this geometry is finally stabilized by the solidification of the material. 液體材料充滿型腔，隨着材料的凝固，零件的幾何形狀最終固定下來。
  • The different parameters symbolizing solidification quality and effect of solidification process parameters on solidification quality are analyzed. 分析了表徵凝固質量的各種參數及凝固過程參數對凝固質量的影響。
  • Reflow Soldering: Melting, joining and solidification of two coated metal layers by application of heat to the surface and predeposited solder paste. 迴流焊：應用加熱金屬塗敷層的表面和預塗焊膏，熔融，連接和凝固兩個金屬塗層。
  • In this paper, zinc alloy solidification and the influences of solidification microstructure to the macroscopic mechanical properties were presented. 本文介紹了鋅鋁合金的凝固特性，以及凝固微觀組織對宏觀機械性能的影響。 [1] 
參考資料