複製鏈接
請複製以下鏈接發送給好友

楊凱

(中國科學院上海硅酸鹽研究所副研究員)

鎖定
楊凱,中國科學院上海硅酸鹽研究所副研究員。
中文名
楊凱
國    籍
中國
出生地
上海市
性    別
職    稱
副研究員

楊凱基本信息

專家類別: 副研
學 歷: 無
通訊地址: 上海市嘉定區和碩路588號

楊凱簡歷

楊凱,男,1980年4月生,博士,副研究員,碩士研究生導師。2003年於鄭州大學獲學士學位;2006年於東南大學獲碩士學位;2010年畢業於上海交通大學材料科學與工程學院,獲工學博士學位;2010~2012年於中國科學院上海硅酸鹽研究所從事博士後研究;2012年5月出站後留所工作;2012年10月任副研究員;2013年12月獲得碩士生導師資格。主要從事熱噴塗新型耐磨抗蝕塗層的設計、製備與工程應用,及其在極端苛刻條件下的塗層服役行為和失效機制研究。作為項目負責人承擔了各類項目6項:JG配套科研項目、國家自然科學基金青年基金項目、上海市自然科學基金面上項目、中國科學院上海硅酸鹽研究所科技創新項目、中國博士後科學基金一等資助項目、上海市博士後科研資助計劃面上項目。作為項目骨幹參與了1項JG配套科研項目和1項民用技術服務項目。獲得各種級別獎勵7項:第四屆上海硅酸鹽所“擷英”青年學術報告會三等獎、軍隊科技進步三等獎、中國科學院上海硅酸鹽研究所優秀博士後、中國科學院王寬誠博士後工作獎、上海市普通高等學校優秀畢業生、國家優秀獎學金、三井化學專項獎學金。迄今為止發表論文共20篇,被SCI/EI/ISTP檢索18篇,其中以第一作者發表論文16篇,被SCI國外期刊收錄13篇(他引次數總和為175次,單篇他引次數最高為97次),申請發明專利6項,參與上海市企業標準制定3項,並任上海市宇航學會會員。

楊凱研究方向

⑴ 新型耐磨抗蝕塗層
⑵ 極端苛刻磨損工況下的塗層服役行為與失效機制

楊凱獲獎及榮譽

⑴ 第四屆上海硅酸鹽所“擷英”青年學術報告會三等獎,2013年
⑵ 天宮一號太陽帆板和氫鎳電池用特種塗層的研製與應用,軍隊科技進步三等獎,2012年
中國科學院上海硅酸鹽研究所優秀博士後,2012年
⑷ 中國科學院王寬誠博士後工作獎,2011年
⑸ 上海市普通高等學校優秀畢業生,2010年
⑹ 國家優秀獎學金,2010年
⑺ 三井化學專項獎學金,2009年

楊凱代表論著

1. Kai Yang*,Xiaming Zhou,Chenguang Liu,Shunyan Tao,Chuanxian Ding.Sliding wear performance of plasma-sprayed Al2O3–Cr2O3 composite coatings against graphite under severe conditions.Journal of Thermal Spray Technology
2. Kai Yang*,Jingwei Feng,Xiaming Zhou,Shunyan Tao.In-situ formed γ-Al2O3 nanocrystals repaired and toughened Al2O3 coating prepared by plasma spraying.Surface and Coatings Technology
3. Kai Yang*,Jingwei Feng,Xiaming Zhou,Shunyan Tao.Microstructural characterization and strengthening-toughening mechanism of plasma-sprayed Al2O3–Cr2O3 composite coatings.Journal of Thermal Spray Technology
4. Kai Yang*,Xiaming Zhou,Huayu Zhao,Shunyan Tao.Microstructure and mechanical properties of Al2O3–Cr2O3 composite coatings produced by atmospheric plasma spraying.Surface and Coatings Technology
5. Kai Yang*,Mingyuan Gu.Enhanced thermal conductivity of epoxy nanocomposites filled with hybrid filler system of triethylenetetramine-functionalized multi-walled carbon nanotube/silane-modified nano-sized silicon carbide.Composites Part A:Applied Science and Manufacturing
6. Kai Yang*,Mingyuan Gu,Yiping Guo,Xifeng Pan,Guohong Mu.Effects of carbon nanotube functionalization on the mechanical and thermal properties of epoxy composites.Carbon
7. Kai Yang*,Mingyuan Gu.Fabrication,morphology and cure behavior of triethylenetetramine-grafted multiwalled carbon nanotube/epoxy nanocomposites.Polymer Journal
8. Kai Yang*,Mingyuan Gu.The effects of triethylenetetramine grafting of multi-walled carbon nanotubes on its dispersion,filler-matrix interfacial interaction and the thermal properties of epoxy nanocomposites.Polymer Engineering and Science
9. Kai Yang*,Mingyuan Gu,Yanping Jin,Guohong Mu,Xifeng Pan.Influence of surface treated multi-walled carbon nanotubes on cure behavior of epoxy nanocomposites.Composites Part A:Applied Science and Manufacturing
10. Kai Yang*,Mingyuan Gu,Haibo Han,Guohong Mu.Influence of chemical processing on the morphology,crystalline content and thermal stability of multi-walled carbon nanotubes.Materials Chemistry and Physics
11. Kai Yang*,Mingyuan Gu,Yanping Jin.Cure behavior and thermal stability analysis of multiwalled carbon nanotube/epoxy resin nanocomposites.Journal of Applied Polymer Science
12. Kai Yang*,Haibo Han,Xifeng Pan,Na Chen,Mingyuan Gu.The effect of chemical treatment on the crystallinity of multi-walled carbon nanotubes.Journal of Physics and Chemistry of Solids
13. Kai Yang*,Jianqing Jiang,Mingyuan Gu.Characterization of titanium nitride films prepared by DC reactive magnetron sputtering at different deposition time.ASME International Mechanical Engineering Congress and Exposition,Proceedings
14. Kai Yang*,Jianqing Jiang,Mingyuan Gu.Effects of nitrogen partial pressure on microstructure,morphology and N/Ti ratio of TiN films deposited by reactive magnetron sputtering.Materials Science and Technology
15. 楊凱*,周霞明,趙華玉,陶順衍,丁傳賢,等離子體噴塗Al2O3–Cr2O3複合塗層耐磨性能研究,材料保護
16. 楊凱*,周霞明,趙華玉,陶順衍,等離子體噴塗Al2O3–Cr2O3複合塗層摩擦學特性,第九屆全國表面工程大會論文集

楊凱發明專利

1. 楊凱,陶順衍,周霞明,趙華玉,丁傳賢,鍾興華,劉晨光,一種適於高PV值的耐磨氧化物陶瓷塗層及其製備工藝
2. 楊凱,陶順衍,周霞明,趙華玉,丁傳賢,鍾興華,劉晨光,等離子體噴塗氧化鉻-氧化鋁複合塗層及其製備方法
3. 陶順衍,楊凱,周霞明,趙華玉,丁傳賢,鍾興華,劉晨光,等離子體噴塗Al2O3–Al複合塗層及其製備方法
4. 陶順衍,周霞明,楊凱,趙華玉,丁傳賢,鍾興華,劉晨光,XX發動機泵端面動密封用耐磨陶瓷塗層及其製備方法
5. 陶順衍,趙華玉,周霞明,楊凱,丁傳賢,鍾興華,劉晨光,XX關節軸承用耐磨陶瓷塗層及製備方法
6. 陶順衍,周霞明,丁傳賢,趙華玉,楊凱,XX高摩擦抗冷焊塗層摩擦副抗冷焊性能檢測方法 [1] 
參考資料
  • 1.    楊凱  .中國科學院上海硅酸鹽研究所.2014-04-17[引用日期2014-04-17]
  • 2.    楊凱  .中國科學院大學[引用日期2023-03-12]