投影控制

MicoConnect允許你控制任何投影機的參數，如亮度，對比度或伽瑪，但也獲得有價值的信息，從投影機的狀態或重要的數據，如設備的序列號或固件版本。 如果你正在尋找一個簡單而智能的應用控制MICO ， MicoConnect將是一個真正的優勢和一個偉大的解決方案！ 它能做什麼？ MicoConnect將幫助您輕鬆控制所有的參數，點擊幾下： MicoConnect設有9個主菜單： 1。遙控器：模擬遙控鑰匙SIM2 2。 IMAGE ：設置亮度和對比度並選擇源，圖像伽瑪校正和影院模式 3。顏色：設置初選，白點，顯示模式和動態黑色。手動調整白點的座標使用的用户選項。 4 。鏡頭設置：調節變焦，聚焦和鏡頭位移（垂直和水平） 5。 ASPECT設置：選擇圖像寬高比5前綴的方面，或在一組選擇3用户方面調整您的首選之一。 6 。梯形校正設置：調整水平和垂直梯形設置。 7。回憶：保存，選擇和重命名的回憶。你有25個不同的存儲器來保存您的首選設置。 8。投影儀信息：檢查投影機的主要信息，如產品序列號，工作狀態，信號狀態，輸入選擇，主動記憶，圖像參數和固件版本。 9。設置：啓用或禁用應用程序聲音和翻頁。將投影機的IP地址和一個日誌文件發送到您所需的服務接觸。Do you want to control your SIM2 MICO projector simply by a touch of a finger MicoConnect allows you to control any projector’s parameter like brightness, contrast or gamma but also to receive valuable information from the status of the projector or important data like unit’s serial number or firmware version. If you are looking for an easy and smart application to control the MICO, MicoConnect will be a real advantage and a great solution! What it does: MicoConnect will help you to easy control all parameters in few clicks: MicoConnect features 9 main menus: 1. REMOTE CONTROL: emulates the SIM2 remote control keys 2. IMAGE: set brightness and contrast and select the source, the image gamma correction and the cinema mode 3. COLORS: set the primaries, the white point, the display mode and the Dynamic Black. Adjust manually the coordinates of white point using the user option. 4. LENS SETUP: adjust Zoom, Focus and lens shift (vertical and horizontal) 5. ASPECT SETUP: select the image aspect ratio among a set of 5 prefixed aspects or adjust your preferred one choosing one of the 3 user aspects. 6. KEYSTONE SETUP: adjust the keystone setting horizontally and vertically. 7. MEMORIES: save, select and rename memories. You have 25 different memories to save your preferred settings. 8. PROJECTOR INFO: Check the main projector information like product Serial Number, working status, signal state, input selected, active memory, image parameters and firmware’ versions. 9. SETTINGS: enable or disable the application Sounds and the page flip. Set the projector IP address and send a log file to your desired service contact. ^[1]