徐兵

2001/7-2003/8，浙江大學機能學院，機械電子控制工程研究所，講師。

2003/9-2007/11，浙江大學機能學院，機械電子控制工程研究所，副教授；

2007/12 -至今，浙江大學機械工程學院，機械電子控制工程研究所，教授；

2009/4-2013/12，浙江大學機械工程學院，機械電子控制工程研究所，副所長；

2014/10 -，浙江大學流體動力與機電系統國家重點實驗室，副主任；

現任浙江大學流體動力與機電系統國家重點實驗室主任、機械工程學院機械電子工程系主任。 ^[3] 

研究方向是流體動力基礎件和機電裝備電液控制系統，主要包括高速重載變量軸向柱塞泵的設計理論與測試方法、高頻響大流量電液控制閥高精度控制技術及電液控制系統的高效功率傳遞與能量調控。

先後作為項目負責人獲得973、863、國家科技支撐計劃及國家自然科學基金等國家和省部級縱向課題二十餘項，研究成果已在《IEEE/ASME Transactions on Mechatronics》等國際刊物上發表SCI論文80餘篇，EI論文80餘篇（不含同時被SCI收錄論文），申請發明專利50餘項，已獲授權國家發明專利40餘項。榮獲國家科技進步二等獎1項，省部級科技進步一等獎4項及二等獎1項。 ^[3] 

1. Wang Qiannan, Xu Bing, Zhang Junhui. Optimization design of the inner radius of the sealing surface of slipper[C]. IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2015 . Best Paper Award.

2. Zhang Junhui, Xu Bing. Simulation Research on distribution method of axial piston pump utilizing pressure equalization mechanism[C]. ICFDM2012.優秀論文獎

3. Xu B, Zhang J H, Yang H Y. Investigation on structural optimization of anti-overturning slipper of axial piston pump[J]. Science China Technological Sciences, 2012, 55(11): 3010-3018. 2015年中國機械工程學會優秀論文獎.

4. 程敏，徐兵，張軍輝，牟家旺。帶虛擬泄漏補償的工程機械變量泵恆功率控制。2016年第九屆全國流體傳動與控制學術會議，最佳論文獎。

5. 林建傑,徐兵,楊華勇.配置蓄能器的變頻驅動液壓電梯能耗特性研究[J].機械工程學報, 2003, 39(7): 63-67.6. 2005年中國機械工程學會優秀論文獎.

7. 歐陽小平,徐兵,楊華勇,等.液壓變壓器在液壓電梯系統中的節能應用[J].中國機械工程, 2003, 14(19): 1660-1662. 2005年中國機械工程學會優秀論文獎. ^[1] 

1、 Chao Qun, Zhang Junhui*, Xu Bing, et al. Discussion on the Reynolds equation for the slipper bearing modeling in axial piston pumps. Tribology International, 2018,118:140-147.

2、Chao Qun, Zhang Junhui*, Xu Bing, Chen Yuan, Ge Yaozheng. Spline design for the cylinder block within a high-speed electro-hydrostatic actuator pump of aircraft. Meccanica,2018, 53:395-411.

3、Zhang Junhui, Chao Qun, Xu Bing*. Analysis of Cylinder Block Tilting Inertia Moment and its Effect on the Performance of High-speed Electro-hydrostatic Actuator Pump of Aircraft. Chinese Journal of Aeronautics. 2018, 31(1):169-177.

4、Chao Qun, Zhang Junhui*, Xu Bing, et al. Multi-position measurement of oil film thickness within the slipper bearing in axial piston pumps.Measurement. 2018, 122：66-72.

5、Zhang Junhui, Xia Shiqi, Ye Shaogan*, Xu Bing, et al. Experimental investigation on the noise reduction of an axial piston pump using free-layer damping material treatment. Applied Acoustics. 2018, 139,1-7.

6、Cheng Min, Zhang Junhui,Xu Bing, Ding Ruqi, et al. Decoupling compensation for damping improvement of the electrohydraulic control system with multiple actuators. IEEE/ASME Transactions on Mechatronics. 2018, accepted. ^[5] 

1、Zhang Junhui*, Chao Qun, Xu Bing, Pan Min, Chen Yuan. Effect of Piston-Slipper Assembly Mass Difference on the Cylinder Block Tilt in a High-Speed Electro-Hydrostatic Actuator Pump of Aircraft. International Journal of Precision Engineering and Manufacturing. 2017, 18(7): 995-1003.

2、Zhang Junhui*, Li Ying, Xu Bing, Pan Min, Lv Fei. Experimental Study on the Influence of the Rotating Cylinder and Circling Pistons on Churning Losses in Axial Piston Pumps. energies. 2017, 10(5): 662.

3、Ye Shaogan, Zhang Junhui*,Xu Bing, et al. Experimental and numerical studies on erosion damage in damping holes on the valve plate of an axial piston pump. Journal of Mechanical Science and Technology. 2017, 31 (9) : 4285~4295.

4、Cheng Min*, Xu Bing, Zhang Junhui, Ding Ruqi. Pump-Based Compensation for Dynamic Improvement of the Electrohydraulic Flow Matching System. IEEE Transactions on Industrial Electronics. 2017, 64(4): 2903-2913.

5、Zhang Junhui, Chao Qun, Wang Qiannan, Xu Bing. Experimental investigation of the slipper spin in an axial piston pump. Measurement, 2017.102:112-120.

6、Ding Ruqi, Xu Bing*, Zhang Junhui, Cheng Min. Online-tuning Pressure Feedback Control by Pole Placement for Vibration Reduction of Excavator with Independent Metering Fluid Power System.mechanical systems and signal processing. 2017, 92: 86-106.

7、Zhang Junhui, Chao Qun, Xu Bing*, Pan Min, Wang Qiannan, Chen Yuan. Novel three-piston pump design for a slipper test rig. Applied Mathematical Modelling.2017, 52: 65-81.

8、Xu Bing, Su Qi, Zhang Junhui*, Lu Zhenyu. Analysis and compensation for the cascade dead-zones in the proportional control valve. ISA transactions. 2017, 66: 393-403.

9、Xu Bing, Dong Pengpeng, Zhang Junhui*, Yao Jinjin. Research on a Novel Flow Rate Inferential Measurement Method and its Application in Hydraulic Elevators. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2017, 231(2): 372-386.

10、Cheng Min, Xu Bing, Zhang Junhui, Ding Ruqi. Valve-based compensation for controllability improvement of the energy-saving electrohydraulic flow matching system. Journal of Zhejiang University SCIENCE A. 2017,18(6):430-442

11、Xu Bing, Chao Qun, Zhang Junhui*, Chen Yuan. Effects of the Dimensional and Geometrical Errors on the Cylinder Block Tilt of a High-speed EHA Pump. Meccanica, 2017, 52(10): 2449-2469.

12、Xu Bing, Hu Min and Zhang Junhui. Distribution characteristics and impact on pump's efficiency of hydro-mechanical losses of axial piston pump over wide operating ranges. Journal of Central South University. 2017, 24(3): 609-624.

13、Zhang Junhui, Yang Meisheng, Xu Bing, et al. A novel intelligent sliding sleeve for shale oil and gas mining equipment[J]. Journal of Petroleum Science and Engineering, 2017, 158: 1-10.

14、Ye S, Zhang J*, Xu B, et al. A hybrid lumped parameters/finite element/boundary element model to predict the vibro-acoustic characteristics of an axial piston pump[J].Shock and Vibration，2017，3871989.

15、Zhang Junhui, Chen Yuan, Xu Bing, et,al.Effects of the Splined Shaft Bending Rigidity on the Cylinder Tilt Behaviour for High-speed Electro-hydrostatic Actuator Pumps, Chinese Journal of Aeronautics. 2017, Accepted.

16、Zhang Junhui, Wang Di, Xu Bing, et,al. Experimental and numerical investigation of flow forces in a seat valve using a damping sleeve with orifices. J Zhejiang Univ-Sci A (Appl Phys & Eng), 2017, Accepted. ^[5] 

1、Ding Ruqi, Xu Bing*, Zhang Junhui, Cheng Min. Bumpless Mode Switch of Independent Metering Fluid Power System for Mobile Machinery. Automation in Construction, 2016, 68: 52-64.

2、Xu Bing, Ye Shaogan, Zhang Junhui*, Zhang Chunfeng. Flow ripple reduction of an axial piston pump by a combination of cross-angle and pressure relief grooves: analysis and optimization. Journal of Mechanical Science and Technology.2016, 30(6): 2531-2545.

3、Xu Bing, Ye Shaogan, Zhang Junhui*. Numerical and experimental studies on housing optimization for noise reduction of an axial piston pump. Applied Acoustics, 2016, 110: 43-52.

4、Xu Bing*, Hu Min, Zhang Junhui. Characteristics of volumetric losses and efficiency of axial piston pump with respect to displacement conditions，Journal of Zhejiang University SCIENCE A. 2016，17（03）：186-201.

5、Xu Bing, Ding Ruqi, Zhang Junhui. Multiphysics Coupled Modeling: Simulation of Hydraulic Operating Mechanism for SF6 High Voltage Circuit Breaker. IEEE/ASME Transactions on Mechatronics. IEEE/ASME Transactions on Mechatronics，2016，21(1)：379-393.

6、Xu Bing, Su Qi, Zhang Junhui. A dead-band model and its online detection for the pilot stage of a two-stage directional flow control valve. Proceedings of the institution of mechanical engineers part c-journal of mechanical engineering science. 2016，230（4）：639-654. ^[5] 

1、Xu Bing, Ye Shaogan, Zhang Junhui*. Noise Reduction of an Axial Piston Pump by Valve Plate Optimization. Chinese Journal of Mechanical Engineering. 2015, Accepted.

2、Xu Bing, Wang Qiannan, Zhang Junhui*. Effect of case drain pressure on slipper swash plate pair within axial piston pump. Journal of Zhejiang University SCIENCE A，2015，16(12)：1001-1014.

3、Xu Bing, Ding Ruqi, Zhang Junhui. Pump/Valves Coordinate Control of the Independent Metering System for Mobile Machinery. Automation in Construction. 2015, 57: 98-111.

4、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui. A Hybrid Displacement/Pressure Control Scheme for an Electrohydraulic Flow Matching System. IEEE/ASME Transactions on Mechatronics. 2015，20（6）：2771-2782.

5、Xu Bing, Hu Min, Zhang Junhui. Impact of Typical Steady-State Conditions and Transient Conditions on Flow Ripple and Its Test Accuracy for Axial Piston Pump. Chinese Journal of Mechanical Engineering. 2015, 28(5): 1012-1022.

6、Xu Bing, Lee Kok-meng, Song Yuechao, Yang Huayong. A Numerical and Experimental Investigation of Parametric Effect on Flow Ripple. proceedings of the institution of mechanical engineers part c-journal of mechanical engineering science.2015，229（16）：2939-2951.

7、Xu Bing, Ye Shaogan, Zhang Junhui. Effects of index angle on flow ripple of a tandem axial piston pump. Journal of Zhejiang University-Science A (Applied Physics & Engineering). 2015, 16: 404-417.

8、Xu Bing, Sun Yinghui, Zhang Junhui, Sun Tong, Mao Zebing. A new design method for the transition region of valve plate for Axial Piston Pump. Journal of Zhejiang University-Science A (Applied Physics & Engineering). 2015, 16(3): 229-240. ^[5] 

1、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui. An energy-saving hydraulic servo system with safety consideration for pipe fatigue tests. Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering. 2014, 228(7): 486-499.

2、Xu Bing, Dong Pengpeng, Zhang Junhui, Zhang Song. Design and evaluation of a novel self-locking quick release mechanism featured by heavy load, fast response, and high security. Advances in Mechanical Engineering. 2014, 2014(2).

3、Xu Bing, Dong Pengpeng, Zhang Junhui, Zhang Song. A three dimensional approach to model steel wire ropes used in high energy absorber apparatus. International Journal of Solids and Structures. 2014, 51：4280-4293.

4、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui, Mao Zebing, Wang Di, Yue Yiming. An automatic three-dimensional loading apparatus for static tests of truss joints. Automation in Construction. 2014, 48：11-17.

5、Xu Bing, Ding Ruqi, Zhang Junhui, Su Qi. Modeling and dynamic characteristics analysis on a three-stage fast-response and large-flow directional valve. Energy Conversion and Management. 2014, 79:187-199. ^[5] 

1、Xu Bing, Cheng Min, Yang Huayong, Zhang Junhui, Yang Meisheng. Safety brake performance evaluation and optimization of hydraulic lifting systems in case of overspeed dropping. Mechatronics. 2013, 23(8):1180-1190.

2、Xu Bing, Zhang Junhui, Yang Huayong. Simulation research on distribution method of axial piston pump utilizing pressure equalization mechanism. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science. 2013, 227(3): 459-469.

3、Xu Bing, Song Yuechao, Yang Huayong. Pre-compression volume on flow ripple reduction of a piston pump. Chinese Journal of Mechanical Engineering (english Edition). 2013, 26(6): 1259-1266.

4、Xu Bing, Zhang Junhui, Yang Huayong, Li Yingbing. Investigation on structural optimization of anti-overturning slipper of axial piston pump. Science in China - Series E: Technological Sciences. 2012, 55(11): 3010-3018.

5、Xu Bing, Zhang Junhui, Yang Huayong, Zhang Bin. Investigation on the radial micro-motion about piston of axial piston pump ，Chinese Journal of Mechanical Engineering (English Edition). 2013, 26(2): 325-333.

6、Liu Wei, Xu Bing, Yang Huayong. Hydraulic Operating Mechanisms for High Voltage Circuit Breakers: Progress Evolution and Future Trends. Science China-Technological Sciences. 2011, 54(1):116-125.

7、Ma Ji'en, Xu Bing, Zhang Bin, Yang Huayong. Flow Ripple of Axial Piston Pump with Computational Fluid Dynamic Simulation Using Compressible Hydraulic Oil. Chinese Journal of Mechanical Engineering (English Edition). 2010, 23(1): 45-52.

8、Ma, Ji-en, Fang, You-tong, Xu, Bing, Yang, Hua-yong. Optimization of cross angle based on the pumping dynamics model. Journal of Zhejiang University-Science A(Applied Physics & Engineering). 2010, 11(3):181-190.

9、Zhang Bin，Xu Bing, Xia Chunlin, Yang Huayong. Modeling and Simulation on Axial Piston Pump Based on Virtual Prototype Technology. Chinese Journal of Mechanical Engineering (English Edition). 2009, 22(1):84-90.

10、Zhang Bin, Xu Bing, Yang Huayong, Luo Degang. Investigation on the Cross Power Control of Axial Piston Double Pump Based on the Virtual Prototype. Journal of Advanced Mechanical Design Systems and Manufacturing. 2009, 3(3): 277-288.

11、Ouyang XiaoPing, Yang HuaYong, Jiang Haoyi, Xu Bing. Simulation of the piezoelectric high-speed on/off valve. Chinese Science Bulletin. 2008, 53(17): 2706-2711

12、Ouyang XiaoPing, Yang HuaYong, Xu Bing, Xu XiuHua. Research on the hydraulic transformer with new distribution pairs. Science in China - Series E: Technological Sciences. 2008, 51(4): 435-442.13、Yang Huayong, Sun Wei, Xu Bing. New Investigation in energy regeneration of hydraulic elevators. IEEE/ASME Transactions on Mechatronics. 2007, 12(5): 519-526.

13、Xu Bing, Yang Jian, Yang Huayong. Comparison of Energy-Saving on the Speed Control of the VVVF Hydraulic Elevator with and without the Pressure Accumulator. Mechatronics. 2005, 15(10):1159-1174.

14、Yang Jian, Xu Bing, Yang Huayong. Study on the Floatation Mechanism and Floatation Performance for the Floatation Cyclone of Natural Inlet Air. Fuel. 2004, 83(17-18): 2419-2425.

15、Yang Huayong, Yang Jian, Xu Bing. Computational Simulation and Experimental Research on Speed Control of VVVF Hydraulic Elevator. Control Engineering Practice. 2004, 12(5): 563-568. ^[5] 

1. 一種新型張緊力可調的鋼索張力均衡化設備,發明專利，ZL201510050708.2,2017-01-18授權

2. 一種採用雙三位三通比例閥結構的新型高頻響先導閥，發明專利，ZL201410731676.8,2017-01-04授權

3. 測試滑靴副油膜厚度的位移傳感器跟隨機構，發明專利，ZL201410360522.2，2016-09-07授權

4. 自定心抗傾覆分體式回程盤，發明專利，ZL201510014623.9，2016-06-08授權

5. 用於先導式比例閥的集成式過濾裝置，發明專利，ZL201310579270.8，2016-04-06授權

6. 採用缸體旋轉的柱塞副摩擦力測量裝置，發明專利，ZL201410380197.6，2016-06-01授權

7. 斜盤旋轉式內置閥配流軸向柱塞泵，發明專利，ZL201410755437.6，2016-08-17授權

8. 一種重載機構的高抗扭連接結構，發明專利，ZL201410398272.1，2016-04-20授權

9. 可進行電機和液壓驅動互換的採煤機截割部，發明專利，ZL201410400219.0，2016-04-13授權

10.手持液壓動力屬具的動力輸出單元，發明專利，ZL201310224395.9，2015-07-15授權

11.一種球絞內置於活塞桿式液壓缸，發明專利，ZL201210444278.9，2015-12-09授權

12.具有負載保持和緩衝減振功能的控制閥組發明，發明專利，ZL 2013101992103，2015-03-11授權

13.工程機械液壓系統，發明專利，ZL201210347745.6，2015-02-25授權

14.高壓大流量油缸動態測試系統，發明專利，ZL201210146090.6，2015-02-04授權

15.一種抗壓力衝擊的低慣性柱塞，發明專利，ZL201210055673.8，2014-09-17授權

16.一種基於串聯泵轉位角的低噪音軸向柱塞泵，發明專利，ZL 201110393825.0，2014-09-03授權

17.一種基於壓力平均低噪聲軸向柱塞泵，發明專利，ZL 201110089678.8，2013-11-13授權

18.高壓斷路器電液伺服操動機構，發明專利，ZL200910097058.1，2012-02-22授權

19.一種柱塞副油膜粘性摩擦力測量裝置，發明專利，ZL200810162050.4，2010-12-15授權

20.一種柱塞泵/馬達的柱塞副油膜特性測試裝置，發明專利，ZL200810162051.9，2010-08-18授權

21.壓電晶體電位移反饋負載口獨立控制液壓衝擊器，發明專利，ZL200810164125.2，2010-08-25授權

22.活塞位移電反饋負載口獨立控制液壓衝擊器，發明專利，ZL200810164124.8，2010-12-15授權

23.一種用於柱塞副微觀性能測試的缸體，發明專利，ZL200710066681.1，2009-02-18授權

24.一種液壓配重可變節能液壓升降系統發明，ZL200610155206.7，2008-10-22授權

25.一種電梯上行保護裝置，發明專利，ZL200510048933.9，2010-07-21授權

26.採用變頻技術的閉式迴路液壓抽油機，發明專利，ZL200410018250.4，2007-07-11授權

27.液壓缸控制的液壓變壓器，發明專利，ZL200410066924.8，2007-02-14授權

28.採用閉式油路的節能電梯液壓系統，發明專利，ZL200410018212.9，2006-08-23授權

29.採用節能油缸的電梯液壓系統，發明專利，ZL200410018213.3，2006-08-23授權

30.變頻液壓電梯用集成閥，發明專利，ZL200410025658.4，2006-08-23授權

31.變頻容積調速閉式液壓控制系統，發明專利，ZL03116049.2，2004-03-17授權

32.降低裝機功率的變頻液壓抽油機，發明專利，ZL200310108820.4，2005-05-25授權

33.浸油式電動機軸轉速測量裝置，發明專利，ZL02110814.5，2006-02-08授權

34.變頻驅動液壓電梯控制系統及控制方法，發明專利，ZL02110815.3，2005-08-24授權

35.採用液壓變壓器液壓電梯節能控制系統，發明專利，ZL03116048.4，2005-06-15授權

36.高速大流量縫隙滑閥，發明專利，ZL03115991.5，2005-05-25授權

37.液壓自由活塞發動機增壓啓動裝置，發明專利，ZL03115990.7，2005-05-04授權

38.變頻容積調速閉式液壓控制系統，發明專利，ZL03116049.2，2006-05-17授權

39.一種液壓變壓器，發明專利，ZL03129072.8，2005-02-02授權

40.變頻容積調速控制的液壓抽油機，發明專利，ZL01139018.2，已授權

41.計算流量反饋控制的電梯液壓系統，發明專利，ZL01142648.9，2004-03-17授權

42.採用蓄能器的變頻驅動液壓電梯節能裝置，發明專利，ZL01122224.7，2003-11-19授權

43.一種無傳感器的閥芯位移自感知方法，ZL201810288225.X，2019-10-29授權

44.用於降低攪拌損失的帶有疏油塗層的軸向柱塞泵，ZL201810752001.X，2019-09-10授權

45.一種多傳感器集成式智能控制比例換向閥及其控制方法，ZL201810786743.4，2019-05-17授權

46.一種先導式液壓閥先導級驅動特性檢測方法，ZL201811063168.1，2019-09-10授權

47.補償三柱塞孔缸體壓緊力的靜壓支承結構，ZL201611057325.9，2018-04-25授權

48.降低軸向柱塞泵攪拌損失的整流裝置，ZL201710213893.1，2018-05-08授權。

49.一種採用碳纖維複合材料聯接及承載的可拆卸液壓缸，ZL201610458532.9，2018-05-25授權。

50.一種液壓離合器冷卻裝置，ZL201610893380.5，2018-09-07授權

51.一種用於液壓離合器的供油控制裝置，ZL201610893632.4，2018-08-21授權

52.適用於雙向變排量柱塞泵的同軸同側緊湊型變量結構，ZL201610966596.X，2018-08-07授權

53.升降平台純水液壓驅動系統，ZL201710288269.8，2018-08-14授權

54.一種微位移驅動開關閥，ZL201610893635.8

55.一種軸向柱塞泵/馬達高速旋轉件攪拌損失測試裝置，ZL201510570706.6

56.一種高壓高速軸向柱塞泵柱塞副四軸力測試裝置，ZL201510570352.5

57.一種無彈簧快速響應閥，ZL 201510546227.0

58.一種多功能柱塞泵滑靴副油膜場參數測試試驗枱，ZL 201510261628.1

59.一種蓄能器驅動的石油完井用滑套開關，ZL 201510128632.0 ^[4] 

1. 軸向柱塞泵柱塞副油膜特性仿真軟件V1.0，軟著，2015SR207720，已授權

2. 開式柱塞泵配流盤設計軟件V1.0，軟著，2014SR154656，已授權

3. 基於Matlab滑靴副油膜特性仿真平台V1.0，軟著，2014SR145793，已授權

4. 數字式比例放大器配置軟件V1.0，軟著，2013SR131017，已授權

5. 基於Matlab柱塞泵流量脈動測試軟件V1.0，軟著，2013SR086593，已授權 ^[1] 

現任中國機械工程學會理事、中國工程機械學會理事、中國機械工程學會機器人分會常務會員、中國機械工程學會流體傳動與控制分會第七屆委員會副主任委員，液壓專業委員主任，中國液壓氣動與密封件工業協會專家委員會委員、中國工程機械學會特大型工程運輸車輛分會副理事長、中國航空學會流體傳動與控制專業委員會委員、全國液壓氣動標準化技術委員會委員、ISO-TC131國際標準專家組成員等。 ^[3] 

2022年4月-2023年10月，任江蘇威博液壓股份有限公司獨立董事。 ^[2] 

1、挖掘機液壓元件關鍵技術與產業化，中國機械工業科學技術獎一等獎，中國機械工業聯合會，排1，2021。

2、高壓軸向柱塞泵/馬達設計與測試關鍵技術及應用，中國機械工業科學技術獎一等獎，中國機械工業聯合會，排1，2015。

3、高性能軸向柱塞泵/馬達設計關鍵技術及應用，高等學校科學技術進步二等獎，教育部，排1，2013。

4、盾構推進電液控制技術及裝備，高等學校技術發明獎一等獎，教育部，排6，2009。

5、電液比例節能型電梯液壓速度控制技術，國家科技進步二等獎，國務院，排2，2003。

6、液壓電梯及其液壓控制系統，中國高校科技進步一等獎，教育部，排2，2001。

7、液壓電梯及其液壓控制系統，浙江省科技進步一等獎，浙江省政府，排3，2001。

1. 2016年浙江省151人次重點層次；

2. 2016年機械工業優秀創新團隊——“高性能液壓基礎件創新團隊”；

3. 2015年創新人才推進計劃中青年科技創新領軍人才；

4. 2009年度教育部新世紀優秀人才資助計劃；

5. 2009年度中國機械工程學會青年科技成就獎；

6. 2009年度浙江省青年科技獎。

1、《基於國家重大項目的研究生教育體系的探索與實踐》，浙江省高等教育教學成果獎一等獎，排3，2016.

2、《軸向柱塞泵聲振特性預測及面向降噪的結構優化》——葉紹幹，浙江省優秀博士畢業生，2016

3、2016年浙江大學先進工作者

4、2011~2016年度中國機械工程學會先進工作者

5、2013年中國液壓氣動密封件工業協會“行業優秀工作者” ^[3]