張旻

2006年9月 大連理工大學博士畢業

2006年10月-2008年12月 清華大學精儀系博士後

2009年1月-2011年12月 美國明尼蘇達大學博士後

2012年1月至今 清華大學深圳研究生院副研究員 ^[1] 

主要從事微納加工工藝的研究，採用自上而下(微加工工藝)與自下而上(自組裝，原位生長等)相結合的方法，實現微納器件的製備與功能化。重點研究基於電化學加工的新型微加工工藝，以及微納連接技術，納米材料製備與組裝技術與金屬氧化物薄膜沉積技術。

[1] Min Zhang, Taiho Yeom, Youmin Yu, Longzhong Huang, Terrence W. Simon, Mark T. North, Tianhong Cui.. Development of synthetic jet arrays for heat transfer enhancement in air-cooled heat sinks for electronics cooling. Proceedings of the ASME 2012 Summer Heat Transfer Conference, July 8-12, 2012, Rio Grande, Puerto Rico.

[2] Bo Zhang*, Min Zhang*, Tianhong Cui. Low-Cost Shrink Lithography with Sub-22 nm Resolution. Applied Physics Letters. 2012, 100, 133113. (*Co-first author) (Highlighted by Nature Materials 11, 358, 2012)

[3] Taiho Yeom, Terrence W. Simon, Min Zhang, Mark T. North, Tianhong Cui. High frequency, large displacement, and low power consumption piezoelectric translational actuator based on an oval loop shell. Sensors and Actuators A. 2012, 176, 99-109.

[4] Min Zhang, Tao Zhang, Tianhong Cui. Wettability conversion from superoleophobic to superhydrophilic on titania/single-walled carbon nanotube composite coatings, Langmuir. 2011, 27, 9295-9301.

[5] Min Zhang, Terrence W. Simon, Longzhong Huang, Vinnee Bharathi A. Selvi, Mark T. North, Tianhong Cui. A polymeric piezoelectric synthetic jet for electronic cooling, Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE 2011, November 11-17, 2011, Denver, Colorado, USA..

[6] Bo Zhang, Min Zhang, Tao Zhang, Tianhong Cui. Enhanced capillary in microchannels coated with nanoscale porous titanium dioxide. Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE 2011, November 11-17, 2011, Denver, Colorado, USA.

[7] Min Zhang, Bo Zhang, Tianhong Cui. Synthesis of ultra-thin superhydrophilic titanium oxide film and its effects on the capillary of microchannels. Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, IMECE 2010, November 12-18, 2010, Vancouver, British Columbia, Canada.

[8] T. Zhang, M. Zhang, T. Cui. Microfluidic valves based on TiO2 coating with tunable surface wettability between superhydrophilic and superhydrophobic. TRANSDUCERS 2011, 306-309, 2011, Beijing, China.

[9] Min Zhang, Dongming Guo, Zhuji Jin. EDM performance of electroformed Cu-ZrB2 shell electrodes, Rapid Prototyping Journal. 2009, 15(2), 150-156.

[10] Min Zhang, Zhaoying Zhou, Xing Yang, Xiongying Ye. Pinning of single-walled carbon nanotubes by selective electrodeposition, Electrochemistry Communications. 2008, 10, 1559-1562.

[11] Min Zhang, Zhaoying Zhou, Xing Yang, Xiongying Ye, Zhong Lin Wang. Fabrication of ZnO nanowire devices by selective electrodeposition, Electrochemical and Solid-State Letters. 2008, 11(9), D69-D71.

[12] D.M. Guo, M. Zhang, Z.J. Jin, B.X. Zuo. Particle strengthening of the surface of copper electrode for electrical discharge machining, International Journal of Materials and Product Technology. 2008,31(1),81-87.

[13] Dongming Guo, Min Zhang, Zhuji Jin, Renke Kang. Effect of direct current and pulse plating on the EDM performance of copper-zirconium diboride composites, Journal of University of Science and Technology Beijing.2007,14(5),464-468.

[14] Dongming Guo, Min Zhang, Zhuji Jin, Renke Kang. Effects of chloride ion on the texture of copper and Cu-ZrB2 coatings electrodeposited from copper nitrate solution in different plating modes，Journal of materials science & technology. 2006,22(5), 643-646.