張國軍

先進陶瓷材料的3D打印製備與結構控制；陶瓷基複合材料的結構與性能關係；功能化結構陶瓷的性能發現與創制工藝。

2009年，中科院百人計劃結題“優秀”；1996年，中國硅酸鹽學會第2屆青年科技獎。

1984年畢業於湖南大學（學士），1987年畢業於天津大學（碩士），1995年在中國建築材料科學研究院獲得博士學位。1987年至1996年在中國建築材料科學研究院從事特種陶瓷的研究與開發工作。1996年至2005年在日本產業技術綜合研究所（AIST九州中心和中部中心）從事先進陶瓷的研究與開發工作。2005年獲中科院“百人計劃”資助回中國科學院上海硅酸鹽研究所工作，2009年結題評為“優秀”。2016年起調入東華大學。中科院百人計劃、上海市浦江人才計劃獲得者。擔任Advances in Applied Ceramics、Journal of the Asian Ceramic Societies、Journal of Advanced Ceramics、Journal of Ceramic Society of Japan、China’s Refractories編委會委員，中國硅酸鹽學會特陶分會理事等。

1987年至1996年在中國建築材料科學研究院從事特種陶瓷的研究與開發工作，1996年至2005年在日本產業技術綜合研究所（AIST九州中心和中部中心）從事先進陶瓷的研究與開發工作，2005年獲中科院“百人計劃”資助回中國科學院上海硅酸鹽研究所工作，主要從事陶瓷基複合材料、功能化結構陶瓷的製備科學、微結構調控和性能評價工作。2016年起調入東華大學。

在本領域權威學術期刊發表論文200餘篇，他引2000餘次，H因子36。

2018：

1. Ji Zou, Hai-Bin Ma, Andrea D'Angio, Guo-Jun Zhang, Tungsten carbide: A versatile additive to get trace alkaline-earth oxide impurities out of ZrB2 based ceramics, Scripta Mater., 147, 40-44 (2018).

2. Guo-Jun Zhang, De-Wei Ni, Ji Zou, Hai-Tao Liu, Wen-Wen Wu, Ji-Xuan Liu, Tohru S. Suzuki, Yoshio Sakka, Inherent anisotropy in transition metal diborides and microstructure/properties tailoring in ultra-high temperature ceramics -A review, J. Euro. Ceram. Soc., 38, 371-389 (2018).

3. Weichao Bao, Jiaxiang Xue, Ji-Xuan Liu, Xingang Wang, Yifeng Gu, Fangfang Xu, Guo-Jun Zhang, Coating SiC on Zircaloy-4 by magnetron sputtering at room temperature, Journal of Alloys and Compounds, 730, 81-87 (2018).

2017：

1. Hai-Bin Ma, Ji Zou, Jing-Ting Zhu, Ping Lu, Fang-Fang Xu, Guo-Jun Zhang, Thermal and electrical transport in ZrB2-SiC-WC ceramics up to 1800C, Acta Mater., 129, 159-169 (2017).

2. Hai-Bin Ma, Ji Zou, Jing-Ting Zhu, Ping Lu, Fang-Fang Xu, Guo-Jun Zhang, Thermal and electrical transport in ZrB2-SiC-WC ceramics up to 1800C, Acta Mater., 129, 159-169 (2017).

3. Yina Du, Ji-Xuan Liu, Yifeng Gu, Xin-Gang Wang, Fangfang Xu, Guo-Jun Zhang, Anisotropic corrosion of ti2AlC and Ti3AlC2 in supercritical water at 500C, Ceram. Inter., 43, 7166 (2017).

4. Hu-Lin Liu, Hai-Bin Ma, Ji-Xuan Liu, Guo-Jun Zhang, Chemical process and solid solution formation in reactive hot pressed ZrB2-SiC ceramics doped with W, Advances in Applied Ceramics, 116 [2] 118-122 (2017).

5. Liu-Lin Liu, Zhen-Yong Man, Ji-Xuan Liu, Xin-Gang Wang, Guo-Jun Zhang, Solid solution and densification behavior of zirconium oxycarbide (ZrCxOy) ceramics via doping ZrO2 and Zr in ZrC, Journal of Alloys and Compounds, 729, 492-497 (2017).

6. Yifeng Gu, Ji-Xuan Liu, Yang Wang, Jia-Xiang Xue, Xin-Gang Wang, Haibin Zhang, Fangfang Xu, Guo-Jun Zhang, Corrosion behavior of TiC-SiC composite ceramics in molten FLiNaK salt, J. Euro. Ceram. Soc., 37, 2575-2582 (2017).

7. Fei Li, Xiao Huang, Guo-Jun Zhang, Preparation of ultra-high temperature ceramics-based materials by sol-gel routes, Chapter 3 in Recent Applications in Sol-Gel Synthesis, edited by Usha Chandra, pp.39-60, Published by Intech, 2017.

8. Yifeng Gu, Ji-Xuan Liu, Fangfang Xu, Guo-Jun Zhang, Pressureless sintering of titanium carbide doped with boron or boron carbide, Journal of the European Ceramic Society, 37, 539-547 (2017).

9. Hai-Bin Ma, Ji Zou, Ping Lu, Jing-Ting Zhu, Zheng-Qian Fu, Fang-Fang Xu, Guo-Jun Zhang, Oxygen contamination on the surface of ZrB2 powders and its removal, Scripta Mater., 127, 160-164 (2017).

10. Wen-Wen Wu, Mehdi Estili, Guo-Jun Zhang, Yoship Sakka, Dispersion and structural evolution of multi-walled carbon nanotubes in ZrB2 matrix, Ceram. Inter., 43, 10533-39 (2017).

2016：

1. Hai-Bin Ma, Guo-Jun Zhang, Hu-Lin Liu, Ji-Xuan Liu, Ying Lu, Fang-Fang Xu, Effect of WC or ZrC addition on thermal residual stress in ZrB2-SiC ceramics, Materials and Design, 110, 340-345 (2016).

2. Ye Yuan, Ji-Xuan Liu, Guo-Jun Zhang, Effect of HfC and SiC on microstructure and mechanical properties of HfB2-based ceramics, Ceramics International, 42, 7861-67 (2016).

3. Ji Zou, Guo-Jun Zhang, Zhi-Jian Shen, Jon Binner, Ultra-low temperature reactive spark plasma sintering of ZrB2-hBN ceramics, Journal of the European Ceramic Society, 36, 3637-45 (2016).

4. Jia-Xiang Xue, Ji-Xuan Liu, Guo-Jun Zhang, Hai-Bin Zhang, Tong Liu, Xiao-Song Zhou, Shu-Ming Peng, Improvement in mechanical/physical properties of TiC-based ceramics sintered at 1500C for inert matrix fuels, Scripta Mater., 114, 5-8 (2016).

5. Ying Lu, Guo-Jun Zhang, Ji-Xuan Liu, Hu-Lin Liu, Xin-Gang Wang, Fang-Fang Xu, Reactive hot-pressing of ZrB2-ZrC-SiC ceramics via direct addition of SiC, Ceramics International, 42, 16474-79 (2016).

6. Wei-Ming Guo, Li-Xiang Wu, Yang You, Hua-Tay Lin, Guo-Jun Zhang, Three-step reactive hot pressing of B4C-ZrB2 ceramics, Journal of the European Ceramic Society, 36, 951-957 (2016).

2015：

1. Hu-Lin Liu, Guo-Jun Zhang, Ji-Xuan Liu, Hou-Zheng Wu, “Synergetic roles of ZrC and SiC in ternary ZrB2-SiC-ZrC ceramics”, Journal of the European Ceramic Society, 35: 4389-4397 (2015).

2. Hu-Lin Liu, Ji-Xuan Liu, Hai-Tao Liu, Guo-Jun Zhang, “Contour maps of mechanical properties in ternary ZrB2-SiC-ZrC ceramic system”, ScriptaMaterialia, 107: 140-144 (2015).

3. Hai-Bin Ma, Zhen-Yong Man, Ji-Xuan Liu, Fang-Fang Xu, Guo-Jun Zhang, “Microstructures, solid solution formation and high-temperature mechanical properties of ZrB2 ceramics doped with 5 vol.% WC”, Materials and Design, 81: 133-140 (2015).

4. Ji-Xuan Liu, Guo-Jun Zhang, Fang-Fang Xu, Wen-Wen Wu, Hai-Tao Liu, Yoshio Sakka, Toshiyuki Nishimura, Tohru S. Suzuki, De-Wei Ni, Ji Zou, “Densification, microstructure evolution and mechanical properties of WC doped HfB2-SiC ceramics”, Journal of the European Ceramic Society, 35: 2707-2714 (2015).

5. Fei Li, Meng-Shi Liang, Xi-Fei Ma, Xiao Huang, Guo-Jun Zhang, “Preparation and characterization of stoichiometric zirconium carbide foams by direct foaming of zirconia sols”,Journal of Porous Materials, 22: 493-500 (2015).

2014:

1. Xin-Gang Wang, Guo-Jun Zhang, Jian Zhao, Jia-Xiang Xue, Chang-ming Xu, and Pei-ling Wang, “High-strength ZrC ceramics doped with Aluminum”, Journal of the American Ceramic Society, 97 (11): 3367-3370 (2014).

2. Yun Tang, Jia-Xiang Xue, Guo-Jun Zhang, Xin-Gang Wang and Chang-Ming Xu, “Microstructural differences and formation mechanisms of spark plasma sintered ceramics with or without boron nitride wrapping”, ScriptaMaterialia,75: 98-101 (2014).

3. Jia-Xiang Xue, Guo-Jun Zhang, Li-Ping Guo, Hai-Bin Zhang, Xin-Gang Wang, Ji Zou, Shu-Ming Peng, Xing-Gui Long, “Improved radiation damage tolerance of titanium nitride ceramics by introduction of vacancy defects”, Journal of the European Ceramic Society,34: 633-639 (2014).

2013:

1. Liu J. X., Huang X., Zhang G. J., “Pressureless sintering of hafnium carbide-silicon carbide ceramics”, J. Am. Ceram. Soc., 96 (6): 1751-1756 (2013).

2. Sun S. K., Zhang G. J., Liu J. X., Zou J., Ni D. W., “Reaction sintering of HfC/W cermets with high strength and toughness”, J. Am. Ceram. Soc., 96 (3): 867-872 (2013).

3. Sun S. K., Zhang G. J., Wu W. W., Liu J. X., Suzuki T., Sakka Y., “Reactive spark sintering of ZrC and HfC ceramics with fine microstructures”, Scripta Mater., 69: 139-142 (2013).

4. Xie B. H., Huang X., Zhang G. J.,” High thermal conductive polyvinyl alcohol composites with hexagonal boron nitride microplatelets as fillers”, Composites Sci. Tech., 85: 98-103 (2013).

5. Xue J. X., Zhang G. J., Xu F. F., Zhang H. B., Wang X. G., Peng S. M., Long X. G., “Lattice expansion and microstructure evaluation of Ar ion-irradiated titanium nitride”, Nuclear Instruments and Methods in Physics Research B, 308: 62-67 (2013).

6. Wang X. G., Zhang G. J., Xue J. X., Tang Y., Huang X., Xu C. M., Wang P. L., “Reactive Hot Pressing of ZrC-SiC Ceramics at Low Temperature”, J. Am. Ceram. Soc., 96 (1): 32-36 (2013).

7. Tang Y., Zhang G. J., Xue J. X., Wang X. G., Xu C. M., Huang X., “Densification and mechanical properties of hot-pressed ZrN ceramics doped with Zr or Ti”, J. Eur. Ceram. Soc., 33 (7): 1363-1371 (2013).

2012:

1. Hui-Yu Qiu, Wei-Ming Guo, Ji Zou and Guo-Jun Zhang, “ZrB2 powders prepared by boro/carbothermal reduction of ZrO2: the effects of carbon source and reaction atmosphere”, Powder Technology, 217: 462-466 (2012).

2. Zou J., Zhang G. J., Hu C. F., Nishimura T., Sakka Y., Vleugels J., Biest O., Strong ZrB2-SiC-WC Ceramics at 1600 degrees C, J. Am. Ceram. Soc., 95 (3): 874-878 (2012).

3. Wang X. G., Liu J. X., Kan Y. M., Zhang G. J., Effect of solid solution formation on densification of hot-pressed ZrC ceramics with MC (M = V, Nb, and Ta) additions, J. Eur. Ceram. Soc., 32 (8): 1795-1802 (2012).

4. Liu H. T., Zou J., Ni D. W., Liu J. X., Zhang G. J., Anisotropy oxidation of textured ZrB2-MoSi2 ceramics, J. Eur. Ceram. Soc., 32 (12): 3469-3476 (2012).

2011:

1. De-Wei Ni, Guo-Jun Zhang, Yan-Mei Kan and Yoshio Sakka，“Textured h-BN Ceramics Prepared by Slip Casting”, J. Am. Ceram. Soc., 94(5): 1397-1404 (2011).

2. Ji Zou, Shi-Kuan Sun, Guo-Jun Zhang, Yan-Mei Kan, Pei-Ling Wang and TatsukiOhji,“Chemical Reactions, Anisotropic Grain Growth and Sintering Mechanisms of Self-Reinforced ZrB2–SiC Doped with WC”, J. Am. Ceram. Soc., 94(5): 1575-1583 (2011).

3. Wei-Ming Guo, Zhen-Guo Yang andGuo-Jun Zhang, “New Borothermal Reduction Route to Synthesize Submicrometric ZrB2 Powders with Low Oxygen Content”, J. Am. Ceram. Soc., 94(11): 3702-3705 (2011).

4. Ji Zou, Guo-Jun Zhang, Shi-Kuan Sun, Hai-Tao Liu, Yan-Mei Kan, Ji-Xuan Liu and Chang-Ming Xu,“ZrO2 removing reactions of Groups IV–VI transition metal carbides in ZrB2 based composites”, J. Eur. Ceram. Soc., 31(3): 421-427 (2011).

5. Xin-Gang Wang，Wei-Ming Guo，Yan-Mei Kan，Guo-Jun Zhang and Pei-Ling Wang，“Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives”, J. Eur. Ceram. Soc., 31(6): 1103-1111 (2011).

6. Hai-Tao Liu, Ji Zou, De-Wei Ni, Wen-Wen Wu, and Guo-Jun Zhang, “Textured and platelet-reinforced ZrB2-based ultra-high-temperature ceramics”, Scripta Materialia, 65(1): 37- 40 (2011).

7. Bo Yuan and Guo-Jun Zhang, “Microstructure and shear strength of self-joined ZrB2 and ZrB2-SiC with pure Ni”, Scripta Materialia, 64: 17-20 (2011).

8. Jia-Xiang Xue, Ji-Xuan Liu, Bin-HuanXie and Guo-Jun Zhang, “Pressure-induced preferential grain growth, texture development and anisotropic properties of hot pressed hexagonal boron nitride ceramics”, Scripta Materialia, 65: 966-969 (2011).

2010:

1. Ji-Xuan Liu, Yan-Mei Kan and Guo-Jun Zhang, “Pressureless sintering of tantalum carbide ceramics without additives”, J. Am. Ceram. Soc., 93: 370-373 (2010).

2. Ji-Xuan Liu, Yan-Mei Kan and Guo-Jun Zhang, “Synthesis of ultra-fine hafnium carbide powder and its pressureless sintering”，J. Am. Ceram. Soc., 93: 980-986 (2010).

3. Ji Zou, Guo-Jun Zhang and Yan-Mei Kan, “Pressureless densification and mechanical properties of hafnium diboride doped with B4C: From solid state sintering to liquid phase sintering”,J. Eur. Ceram. Soc.,30: 2699-2705 (2010).

4. Ji-Xuan Liu, Bo-Yuan, Yan-Mei Kan, Guo-Jun Zhang and Pei-Ling Wang, “Properties of porous Si3N4/BN composites fabricated by RBSN technique”, Int. J. Appl. Ceram. Technol., 7: 536-545 (2010).

獲專利授權12項。

近年來負責完成了中國科學院百人計劃“硼化物基陶瓷的製備科學與性能表徵”（2005-2009）、國家自然科學基金委重點項目“超高温陶瓷相圖、材料製備與微結構控制的研究”（2007-2010）、其他面上項目及國際合作項目，以及中科院及上海市科委的國際合作項目等多項課題。目前主要負責承擔國家自然科學基金委重點項目、面上項目、以及中日NSFC-JSPS合作項目等。

在重要國際學術會議上做邀請報告40餘次，積極與國內外同行組織國際學術會議，為合作項目的順利開展提供有效的學術交流平台，為研究生參與國際學術交流創造更多機會。與日本物質材料研究機構、意大利陶瓷科學技術研究所、比利時魯汶大學等建立了良好的合作研究關係，每年派遣青年教師、研究生赴國外研究機構開展合作研究，同時也為研究生畢業後順利聯繫國外博士後創造條件。 ^[1]