吳立建

1997年-2004年 合肥工業大學學士和碩士。

2008年-2011年 英國謝菲爾德大學博士。

2004年-2007年 台達電力電子上海研發中心，高級工程師。

2012年-2013年 西門子風力發電謝菲爾德研發中心，研發工程師。

2013年-2016年 西門子風力發電丹麥總部，高級工程師。

海上大型永磁直驅風力發電機電磁項目負責人。

2016年-至今 浙江大學電氣工程學院，研究員。

2017年-至今 浙江大學上海電氣風電研發中心，主任。

2017年-至今 上海電氣風電集團，副總工程師。 ^[1] 

《特種電機及驅動技術》 ^[1] 

電機設計及驅動、新型永磁電機優化設計及驅動、大型風力發電機系統、航空航天電磁驅動系統。 ^[1] 

2020年1月-2023年12月：新型高轉矩密度容錯型雙饋磁通切換電機工作機理及性能研究，項目負責人，（國家自然科學基金面上）

2019年2月-2023年1月：大型海上風電機組及關鍵部件優化設計及批量化製造、安裝調試與運行關鍵技術，子課題負責人，（國家重大研發計劃）

2017年-2022年：非平穩荷載高功率密度永磁電機可靠性設計的理論與方法，子課題負責人，（自然科學基金重點）

2017年-2021年：大型直驅風力發電用雙定子永磁無刷電機的結構創新和基礎理論研究，項目負責人，（國家自然科學基金面上）

2017年-2020年：大型永磁直驅風力發電技術 （上海電氣風電集團有限公司，重大橫向課題）

Jan 2009-Dec 2011: Advanced modeling of permanent magnet machines (Motor Design Ltd).

Feb 2008-Feb 2011: Acoustic noise and vibration of permanent magnet brushless machines (EPSRC, UK Govern).

Apr 2011-Oct 2011: A high speed brushless DC motor for tooling application (Bosch).

Dec 2009-Mar 2010: Advanced modeling of magnetic gears (Mitsubishi).

Aug 2009-Nov 2009: Analysis and design of an external rotor permanent magnet hub motor (ITRI, Taiwan).

Feb 2009-Jun 2009: Direct-drive permanent magnet wind power generator (Siemens).

Jan 2008-Feb 2008: Cost effective design of brushless DC motor for lawn mower application (Bosch).

Dec 2007-Jan 2008: Comparative study of interior PM and synchronous brushless AC machines (Toyota).

期刊文章（54篇）

[1]Manying Chen, Lijian Wu*, Liu Zhang, and Qinfen Lu, 'A novel doubly-fed flux reversal linear machine with armature windings wound on both stator and mover teeth”,IEEE Access, in press, Digital Object Identifier:

[2]Lijian Wu*, Yidong Du, and Youtong Fang, 'Influence of loadcharacteristicson three-phase short circuit and demagnetization of surface-mounted PM synchronous motor”,IEEE Trans. Ind. Appl., in press, Digital Object Identifier:

[3]Lijian Wu*, Jiabei Zhu, and Youtong Fang, 'A novel doubly-fed flux-switching permanent machine with armature windings wound on both stator poles and rotor teeth”,IEEE Trans. Ind. Electron., in press, Digital Object Identifier:

[4]Lijian Wu*, Hao Yin, Dong Wang, and Youtong Fang, 'On-load field prediction in SPM machines by a subdomain and magnetic circuit hybrid model,'IEEE Trans. Ind. Electron., in press, Digital Object Identifier:

[5]Lijian Wu, Hao Yin, Dong Wang*, and Youtong Fang, 'A nonlinear subdomain and magnetic circuit hybrid model for open-circuit field prediction in surface-mounted PM machines,'IEEE Trans. Energ. Conv.,

[6]Jiabei Zhu,Lijian Wu*, Xiaoyan Huang, and Youtong Fang, 'Influence of clamping bolts on electromagnetic performance of PMSM machines and its restraining methods,'IEEE Trans. Ind. Appl.,

[7]Dong Yu, Xiaoyan Huang*,Lijian Wu, and Youtong Fang, 'Design and analysis of outer rotor permanent-magnet vernier machines with overhang structure for in-wheel direct-drive application,'Energies,

[8]Yunlong Zhong,Lijian Wu*, Xiaoyan Huang, and Youtong Fang, 'Modeling and design of a 3-DOF magnetic bearing with toroidal radial control coils,'IEEE Trans. Magn.,

[9]Yuanwen Li, Changsheng Zhu*,Lijian Wu, and Yuting Zheng, 'Multi-objective optimal design of high-speed surface-mounted permanent magnet synchronous motor for magnetically levitated flywheel energy storage system,'IEEE Trans. Magn.,

[10]Zhaokai Li, Xiaoyan Huang*,Lijian Wu, Teng Long, Bowen Shi, and He Zhang, 'Open-circuit field prediction of interior permanent-magnet motor using hybrid field model accounting for saturation,'IEEE Trans. Magn.,

[11]Lijian Wu*, Minchen Zhu, Dong Wang, and Youtong Fang, 'A subdomain model for open-circuit field prediction in dual-stator consequent-pole permanent magnet machines,'IEEE Trans. Magn.

[12]Liu Zhang,L. J. Wu*, Xiaoyan Huang, Youtong Fang, and Qinfen Lu, 'A novel structure of doubly salient permanent magnet machine in square envelope,'IEEE Trans. Magn.,

[13]Yuting Zheng,Lijian Wu*, Youtong Fang, Xiaoyan Huang and Qinfen Lu, 'A hybrid interior permanent magnet variable flux memory machine using two-part rotor,'IEEE Trans. Magn.,

[14]Yiming Shen, Zhiqiang Zeng, Qinfen Lu*, andL.J. Wu, 'Design optimization and performance investigation of linear doubly salient slot permanent magnet machines,'IEEE Trans. Ind. Appl.,

[15]L. J. Wu, Z. Li, D. Wang, X. Huang and Z. Q. Zhu*, 'On-load field prediction of surface-mounted PM machines considering nonlinearity based on hybrid field model,'IEEE Trans. Magn.,

[16]Xiaoyan Huang*, Chenxi Zhou, Kaihe Zhang,Lijian Wu, Jian Zhang, and Wenping Cao, 'Comparison of electromagnetic performance of SCPM wind power generators with different topologies,'IEEE Transactions on Applied Superconductivity,

[17]Kaihe Zhang, Xiaoyan Huang*,Lijian Wu, Youtong Fang, and Wenping Cao, 'Stator design aspects for permanent magnet superconducting wind power generators,'IEEE Transactions on Applied Superconductivity,

[18]F. Niu*, X. Huang, L. Ge, J. Zhang,L. Wu, Y. Wang, K. Li, and Y. Fang, 'A simple and practical duty cycle modulated direct torque control for permanent magnet synchronous motors,'IEEE Transactions on Power Electronics,

[19]Yunlong Zhong,Lijian Wu,Xiaoyan Huang, and Youtong Fang, “Nonlinear analytical model of heteropolar radial magnetic bearing,”Journal of Zhejiang University(Engineering Science), no. 鍾雲龍,吳立建,黃曉豔,等.異極型徑向磁軸承的非線性解析模型[J].浙江大學學報(工學版),

[20]Minchen Zhu,L. J. Wu, Y. T. Fang, and Thierry Lubin, 'Subdomain model for predicting armature reaction field of dual-stator consequent-pole PM machines accounting for tooth-tips,'CES Transactions on Electrical Machines and Systems,

[21]J. Li, X Huang*, F. Niu, C. You,L. Wu, Y. Fang, 'Prediction error analysis of finite-control-set model predictive current control for IPMSMs,'Energies,

[22]L. J. Wu*, Zhaokai Li, Xiaoyan Huang, Yunlong Zhong, Youtong Fang, and Z. Q. Zhu, 'A hybrid field model for open-circuit field prediction in surface-mounted PM machines considering saturation',IEEE Transactions on Magnetics,

[23]Yuzheng Chen, Xiaoyan Huang*, Jun Wang; Feng Niu, Jian Zhang, Youtong Fang, andLijian Wu, 'Improved flux-weakening control of IPMSMs based on torque feedforward technique',IEEE Transactions on Power Electronics,

[24]Yunlong Zhong,Lijian Wu*, Youtong Fang and Xiaoyan Huang, 'Investigation of cross-coupling effect of a 3-DOF magnetic bearing using magnetic circuit method,'COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,

[25]L. J. Wu*, Z. Q. Zhu, Y. T. Fang, and X. Y. Huang, 'Difference in unbalanced magnetic force of fractional-slot PM machines between internal and external rotor topologies,'CES Transactions on Electrical Machines and Systems,

[26]Y. Zhong,L. Wu*, X. Huang, Y. Fang, and J. Zhang, 'An improved magnetic circuit model of a 3-DOF magnetic bearing considering leakage and cross-coupling effects,'IEEE Transactions on Magnetics,

[27]X. Huang, K. Zhang,L. Wu*, Y. Fang, and Q. Lu, 'Design of a dual-stator superconducting permanent magnet wind power generator with different rotor configuration,'IEEE Transactions on Magnetics,

[28]K. Zhang, X. Huang*, J. Zhang,L. Wu, Y. Fang, and Q. Lu, 'Design and analysis of a switched reluctance motor with superconducting windings and tapering poles,'IEEE Transactions on Applied Superconductivity,

[29]L. J. Wuand Z. Q. Zhu, 'Analytical modeling of surface-mounted PM machines accounting for magnet shaping and varied magnet property distribution,'IEEE Trans. Magn.,

[30]L. J. Wuand Z. Q. Zhu, 'Simplified analytical model and investigation of open-circuit AC winding loss of permanent-magnet machines,'IEEE Trans. Ind. Electron.,

[31]L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Analytical model of eddy current loss in windings of permanent magnet machines accounting for load,”IEEE Trans. Magn.,

[32]L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Analytical modeling and analysis of open-circuit magnet loss in surface-mounted permanent magnet machines,”IEEE Trans. Magn.,

[33]L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Analytical model for predicting magnet loss of surface-mounted permanent magnet machines accounting for slotting effect and load,”IEEE Trans. Magn.,

[34]L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Comparison of analytical models of cogging torque in surface-mounted PM machines,”IEEE Trans. Ind. Electron.,

[35]L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Analytical prediction of electromagnetic performance of surface-mounted PM machines based on subdomain model accounting for tooth-tips,”IEE Proc. - Electric Power Appl.,

[36]L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “Subdomain model for predicting armature reaction field of surface-mounted permanent-magnet machines accounting for tooth-tips,”IEEE Trans. Magn.,

[37]L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, “An improved subdomain model for predicting magnetic field of surface-mounted permanent magnet machines accounting for tooth-tips,”IEEE Trans. Magn.,

[38]L. J. Wu, Z. Q. Zhu, J. T. Chen, and Z. P. Xia, “An analytical model of unbalanced magnetic force in fractional-slot surface-mounted permanent magnet machines,”IEEE Trans. Magn.,

[39]L. J. Wu, Z. Q. Zhu, J. T. Chen, Z. P. Xia, and G. W. Jewell, “Optimal split ratio in fractional-slot interior permanent-magnet machines with non-overlapping windings,”IEEE Trans. Magn.,

[40]Y. Oner, Z. Q. Zhu,L. Wu, X. Ge, H. Zhan, and J. Chen, 'Analytical on-load sub-domain field model of permanent magnet vernier machines,'IEEE Transactions on Industrial Electronics,

[41]Y. Oner, Z. Q. Zhu,L. J. Wu, and X. Ge, 'Analytical sub-domain model for predicting open-circuit field of permanent magnet vernier machine accounting for tooth tips,'COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,

[42]Y. Oner, Z. Q. Zhu,L. J. Wu, and X. Ge, 'Sub-domain analytical model for armature reaction field of permanent magnet vernier machine,'COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering,

[43]Y. Li, Z. Q. Zhu,L. J. Wu, G. J. Li, and D. Wu, “Analytical synthesis of air-gap field distribution in permanent magnet machines with rotor Eccentricity by superposition method”,IEEE Trans. Magn.,

[44]Z. Q. Zhu,L. J. Wuand M. L. Mohd Jamil, “Influence of pole and slot number combinations on cogging torque in permanent magnet machines with static and rotating eccentricities,”IEEE Trans. Ind. Appl.,

[45]Z. Q. Zhu,L. J. Wuand M. L. Mohd Jamil, “Distortion of back-EMF and torque of PM brushless machines due to eccentricity,”IEEE Trans. Magn.,

[46]Z. Q. Zhu, M. L. Mohd Jamil, andL. J. Wu, “Influence of slot and pole number combinations on unbalanced magnetic force in PM machines with diametrically asymmetric windings,”IEEE Trans. Ind. Appl.,

[47]A. S. Thomas, Z. Q. Zhu, andL. J. Wu, “Novel modular rotor switched-flux permanent magnet machines,”IEEE Trans. Ind. Appl.,

[48]Z. Q. Zhu,L. J. Wu, and Z. P. Xia, “An accurate subdomain model for magnetic field computation in slotted surface-mounted permanent-magnet machines,”IEEE Trans. Magn.,

[49]Z. Q. Zhu, Z. P. Xia,L. J. Wu, and G. W. Jewell, “Analytical modeling and finite-element computation of radial vibration force in fractional-slot permanent-magnet brushless machines,”IEEE Trans. Ind. Appl.,

[50]Z. Q. Zhu, J. T. Chen,L. J. Wu, and D. Howe, “Influence of stator asymmetry on cogging torque of permanent magnet brushless machines,”IEEE Trans. Magn. ^[1] 

1.浙江大學“百人計劃”引進人才。

2. ICEMS2019 最佳論文獎2項。 ^[1]